€5.74
5,74 € tax excl.
Aluminum blow gun for any use with short nozzle Working pressure: 1.0 - 6.0 bar
Filter By
Filter By
Home
Filter By
€8.20
8,20 € tax excl.
Aluminum blow gun for any use with 150 mm long barrel Working pressure: 1.0 - 6.0 bar
€27.79
27,79 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 1 m foldable in shapeable copper Working pressure: 1.0 - 6.0 bar
€676.23
676,23 € tax excl.
Fein FSN400 Multifunction Tool with Speed Controller
Equipment
FSN400 Multifunction Tool
Hand and machine protection bracket
Tool fixing screw
2-hole nut wrench
Sharpening stone
€490.98
490,98 € tax excl.
Fein WPO 14-15 E angle polisher, with anti-vibration handle and speed regulator
€27.05
27,05 € tax excl.
Features:
Repair quickly in all weather conditions, even in rain or snow
Applies to dry and wet surfaces
Adheres to practically all surfaces: aluminium, zinc, lead, glass, stone, asphalt, bitumen, solid PVC,...
€21.23
21,23 € tax excl.
Pneumatic inflating gun body in shockproof nylon - Manometer diameter mm. 63 - Tube length mm. 400 - Brass head
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€20.25
20,25 € tax excl.
Maximum precision in tracing the direction of the cut with a practical laser beam that springs from the ring nut to the disk.
For TwinBlade 115 - TwinBlade 160
€98.36
98,36 € tax excl.
Tank - Nylon 680 cc Body - Nickel-plated sandblasted brass Cap - Nickel-plated brass Needle / Springs / Nozzle - Stainless Steel Adjustments - Product / range Weight 780 g Operating pressure 3.0 - 3.5 bar Air...
€5.74
5,74 € tax excl.
Pendant for LED bulbs E27 suspension with textile wire
Available Color: GREY (other colors on request)
Bulb EXCLUDING
€42.80
42,80 € tax excl.
Features:
Contains special resins that give the repair particular properties that allow it to withstand pressures up to 30 bar and temperatures up to 270°C
Withstands up to 30 bar by applying a thickness of 25 mm...
€19.67
19,67 € tax excl.
Features:
Revolutionizes building systems. Replaces mortar and adhesive
Bauer PolyCem is a sealing material, which is capable of definitively getting rid of rising damp in the walls
Ideal for cementing perforated...
€17.46
17,46 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 150 mm curved Working pressure: 1.0 - 6.0 bar
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€394.00
394,00 € tax excl.
Fein Multimaster cordless multi-tool set, ideal for numerous renovation and renovation applications.
Equipment
1 FEIN MultiMaster AFMM 14
5 sanding sheets each of 60,80,120,180 grit
1 Triangular perforated hard...
-30%
€11.48
€16.39
11,48 € tax excl.
Features:
It captures and destroys the curses molecules on the tissues and releases a fresh and lasting fragrance
Essence of Cotton Flowers
With a few sprays and in just 5 minutes it acts on the bad smells of the...
€41.80
41,80 € tax excl.
Twin 115 mm replacement blades for Stainless Steel for STRIKE double-counter rotating blades.
Cutting stability, without burrs
No Gyroscope effect (more security)
Total or partial cancellation of the forces that...
€36.89
36,89 € tax excl.
Twin 115 mm replacement pair of diamond blades for STRIKE double-counter rotating blades.
Cutting stability, without burrs
No Gyroscope effect (more security)
Total or partial cancellation of the forces that tend...
€20.49
20,49 € tax excl.
Features:
3 in 1: repairing, sealing, waterproofing
Used for sealing water leaks on roofs, rain pipes, roofing tiles and patios
Adapts to any substrate (wood, metal, plastic, cement, etc.) and any type of forms,...
€20.49
20,49 € tax excl.
Features:
3 in 1: repairing, sealing, waterproofing
Used for sealing water leaks on roofs, rain pipes, roofing tiles and patios
Adapts to any substrate (wood, metal, plastic, cement, etc.) and any type of forms,...
€19.02
19,02 € tax excl.
Aluminum washing gun with bayonet tank with 1000 cc screw closure Adjustable nebulizer nozzle in nickel-plated brass Extra wide opening - Bayonet lock Working pressure: 2.0 - 8.0 bar
€10.40
10,40 € tax excl.
Coupling device for suspension to a horizontal and vertical balance
€89.40
89,40 € tax excl.
Self-centering chuck for direct connection of the male clamping range 2.0 - 8.1 mm, with key
€132.00
132,00 € tax excl.
Self-centering oscillating chuck for direct connection of the male clamping range 2.0 - 8.1 mm, with key
€50.00
50,00 € tax excl.
Features:
Contains special resins that give the repair particular properties that allow it to withstand pressures up to 30 bar and temperatures up to 270°C
Withstands up to 30 bar by applying a thickness of 25 mm...
€8.20
8,20 € tax excl.
Features:
Pure zinc powder dispersed in a given resin
It is designed specifically for touch-up and repair of galvanized areas
Identical brilliant color obtained by galvanizing
Special anti-corrosion technology...
€113.11
113,11 € tax excl.
Portable and compact double-blade saw ideal for cutting thin sheets and laminates of any material. Ingenious lubrication system particularly suitable for cutting mild steel and light alloys. Double carter to guarantee...
€18.85
18,85 € tax excl.
Features:
3 in 1: repairing, sealing, waterproofing
Used for sealing water leaks on roofs, rain pipes, roofing tiles and patios
Adapts to any substrate (wood, metal, plastic, cement, etc.) and any type of forms,...
€18.03
18,03 € tax excl.
Features:
3 in 1: repairing, sealing, waterproofing
Used for sealing water leaks on roofs, rain pipes, roofing tiles and patios
Adapts to any substrate (wood, metal, plastic, cement, etc.) and any type of forms,...
Out-of-StockSold out
€24.40
24,40 € tax excl.
Clamping pliersfor straight chucks and oscillating collet chucks
Out-of-StockSold out
€31.15
31,15 € tax excl.
Kit for extending the diameter of TwinBlade 115 blades from 115 to 155 mm, bringing the useful cutting height from 25 to 45 mm.
Kit consisting of a pair of 155 mm blades and a double crankcase to replace the original...
Out-of-StockSold out
€29.70
29,70 € tax excl.
Extraction wedge For chuck, pack of 2 pcs.
Attack B 12
Length 125 mm
Out-of-StockSold out
€137.60
137,60 € tax excl.
Oscillating chuck with clamping collets with 3.5/4.5/6 mm clamping collet
Out-of-StockSold out
€87.70
87,70 € tax excl.
Fein straight collet chuck with 3.5/4.5/6 mm collet
Out-of-StockSold out
€815.57
815,57 € tax excl.
Fast and precise tapping machine with reverse gear for shorter working times.
(supplied without chuck)
Out-of-StockSold out
€86.07
86,07 € tax excl.
Pneumatic sandblasting gun for professional sandblasting and tempered steel nozzle PS Walmec sandblasting gun with nozzle, for dry decapage work and difficult and delicate decapage on all supports: metal, wood, etc......
Showing 1-47 of 47 item(s)
Italiano
Français
Deutsch
Español