Click for more products.
No produts were found.
Filter By
Filter By
Color or Finish
Metric step
Diameter
Length
Measure
Length
Packaging
Entrance
Weight
  • 0 kg - 11 kg

Brand
Brand

Home

€0.41
0,41 € tax excl.
Ajustable tub for Easy-matic for Mediana Evolution and Centro(latch only) locks. Finish: Beige - Gray RAL 7036 - White - Matt black Measures looks image.
€7.00
7,00 € tax excl.
Lock complete with key for flush or hinged interior doors available in latch and deadbolt version, or latch only. In flush doors the symmetrical positions of the handle panel and key hole allow the use of ambidextrous...
€11.08
11,08 € tax excl.
Lock complete with key for internal flush or hinged doors with central latch in polyamide that gives it extraordinary silence when closing while maintaining reliability and robustness. With QUICK LATCH, the new...
€13.68
13,68 € tax excl.
Magnetic movement lock particularly suitable for interior doors with a modern design and essential lines. Polaris 2XT stands out for its extraordinary silence when closing and the precision in the mechanical couplings...
€18.99
18,99 € tax excl.
Magnetic movement lock particularly suitable for interior doors with a modern design and essential lines. Polaris 2XT stands out for its extraordinary silence when closing and the precision in the mechanical couplings...
€14.79
14,79 € tax excl.
Magnetic movement lock particularly suitable for interior doors with a modern design and essential lines. Polaris 2XT stands out for its extraordinary silence when closing and the precision in the mechanical couplings...
€4.29
4,29 € tax excl.
Nylon striker with round edge, width 18 mm, length 57 mm. Minimalist and linear design that makes it almost imperceptible on the door frame. Adjustable in pressure up to 1.5 mm by rotating the striker 180 °. To be...
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€9.84
9,84 € tax excl.
It holds the sash wide open, securing it to the wall. Particularly suitable for doors. However, since the striker is small, it can also be applied to the lower transom of window shutters. From the collaboration with...
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...
€9.08
9,08 € tax excl.
Lock complete with key for flush or hinged interior doors available in latch and deadbolt version, or latch only. In flush doors the symmetrical positions of the handle panel and key hole allow the use of ambidextrous...
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.
€0.22
0,22 € tax excl.
Door-lifting washer in brass for AGB hinges, specific for hinges of interior doors and main doors. Diameter(D): 13 - 14 - 16 mm Finish: Natural brass Measures looks image.
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...
€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right. The...
€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
€21.54
21,54 € tax excl.
Lightweight hook lock suitable for installation on metal sliding doors, with external hook that can be moved by handle and key Front 22x188 mm, Backset 30-35-40-45-50-60 mm for metal profile. Finish:...
€0.99
0,99 € tax excl.
Easy-matic striker for flush door 44 mm thick, X=11, for Mediana Evolution lock. Finish: Oct. vern.-Nich.-Oct. antique-Bronzed vern.-Matt chrome. Measurements as shown in the pictures.
€1.64
1,64 € tax excl.
Guide for securing the closure rod, also useful to prevent deformation during normal use of shutters. Install one guide approximately every 400 mm of rod length. The guides should be appropriately distributed between...
€2.99
2,99 € tax excl.
Key with encryption from 1 to 12 - Patent for AGB door locks Finishes: Bronzed - Brass - Nickel plated
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...
€5.74
5,74 € tax excl.
Pendant for LED bulbs E27 suspension with textile wire Available Color: GREY (other colors on request) Bulb EXCLUDING
€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
Screw Flat Head Countersunk Cross footprint bronzed for wood Screw Flat Head Countersunk Cross footprint bronzed for wood
-30%
€5.01 €7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood white galvanized cross countersunk flat head Screw for wood white galvanized cross countersunk flat head
-30%
€4.31 €6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood Yellow galvanized cross countersunk flat head Screw for wood Yellow galvanized cross countersunk flat head
-30%
€4.17 €5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Showing 1-90 of 156 item(s)

Settings

Menu

Create a free account to use wishlists.

Sign in