Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Color or Finish
Metric step
Diameter
Length
Measure
Length
Packaging
Weight

  • 0 kg - 18 kg

Brand
Brand

Home

Filter By
Brand: Bessey Tool Brand: Evolution Power Tools Brand: Festool Brand: IBFM Brand: Tecfi Brand: V-TAK Brand: VDS Clear all
Aluminum combination deadbolts IBFM 56 Aluminum combination deadbolts IBFM 56

Aluminum combination deadbolts IBFM 56

€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
Bessey D51A Multipurpose shears MULTISPIN Master Bessey D51A Multipurpose shears MULTISPIN Master

Bessey D51A Multipurpose shears MULTISPIN Master

€11.89
11,89 € tax excl.
Stainless steel blades in synthetic resin body, with handles for continuous cuts of up to stainless steel sheet 0.4 mm, copper 0.6 mm, aluminum 0.7 mm and also in synthetic resin networks, insulating materials,...
Bessey KLIKLAMP Hightech lever clamp Bessey KLIKLAMP Hightech lever clamp

Bessey KLIKLAMP Hightech lever clamp

€18.28
18,28 € tax excl.
Magnesium lever clamp with quick, light and delicate clamping. Ideal for assembly work or for simultaneous use of multiple clamps. With serrated VIBRAFIX mechanism, clamping force of 1200 N which can be actuated with...
IBFM 475 spring staples against dust for locks IBFM 475 spring staples against dust for locks

Built-in floor well with dust cap and spring

€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...
Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Cremone handle with key for window IBFM 565/ZA Cremone handle with key for window IBFM 565/ZA

Cremone handle with key for window IBFM 565/ZA

€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.
IBMF double acting spring hinges "Bommer" type IBMF double acting spring hinges "Bommer" type

Double action Bommer type spring hinge

€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...
Extension table VB, 492090 for table saw Festool Extension table VB, 492090 for table saw Festool

Extension table VB, 492090 for table saw Festool

€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right. The...
Extension table VL, 492092 for table saw Festool Extension table VL, 492092 for table saw Festool

Extension table VL, 492092 for table saw Festool

€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
IBFM Window opening stop wasistas IBFM Window opening stop wasistas

Guide arm with stop for bottom hinged windows 347

€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only) sliding slot 14 cm base attacks 2.5x2.5 and 3.3x2.5 cm IBMF article 347 FINISHES: Tropicalized steel Bronzed Steel
Metal lock for mailboxes IBFM filing cabinet 142 Metal lock for mailboxes IBFM filing cabinet 142

Metal lock for mailboxes IBFM filing cabinet 142

€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
IBMF 102 single actin spring hinge "Bommer" type IBMF 102 single actin spring hinge "Bommer" type

Pair of single action Bommer type spring hinges

€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...
Screw countersunk flat head with cross recess stainless steel Screw countersunk flat head with cross recess stainless steel

Screw countersunk flat head with cross recess stainless steel

€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
Screw Flat Head Countersunk Cross footprint bronzed for wood Screw Flat Head Countersunk Cross footprint bronzed for wood
-30%

Screw Flat Head Countersunk Cross footprint bronzed for wood

€5.01 €7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood white galvanized cross countersunk flat head Screw for wood white galvanized cross countersunk flat head
-30%

Screw for wood white galvanized cross countersunk flat head

€4.31 €6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood Yellow galvanized cross countersunk flat head Screw for wood Yellow galvanized cross countersunk flat head
-30%

Screw for wood Yellow galvanized cross countersunk flat head

€4.17 €5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Set 25 abrasive discs Mix 496124, Ø 225 mm Festool Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

€33.00
33,00 € tax excl.
Mix of 25 abrasive discs Ø 225 mm. Brilliant2 for roughing, intermediate sanding, and finishing of furniture: 5 pieces P150 BR2 5 pieces P180 BR2 5 pieces P240 BR2 Cristal for coarse and rapid pre-sanding of...
Sliding table ST, 492100 Festool Sliding table ST, 492100 Festool

Sliding table ST, 492100 Festool

€397.54
397,54 € tax excl.
The sliding table offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 50. But other desired angles can also be set. Simply push the...
Spiral blade HS 82 RF, 484518 for planer Festool Spiral blade HS 82 RF, 484518 for planer Festool

Spiral blade HS 82 RF, 484518 for planer Festool

€24.00
24,00 € tax excl.
Replacement planer blade for the HK 82 RF rustic planing head in the fine version. This creates a wavy planing result. It resembles very weathered wood, especially if the surface is brushed after planing. The result...
Splinter guard FS-SP 5000/T, 495209 for guide rail Festool Splinter guard FS-SP 5000/T, 495209 for guide rail Festool

Splinter guard FS-SP 5000/T, 495209 for guide rail Festool

€34.00
34,00 € tax excl.
The splinter guard prevents the edges from splintering, even with angled cuts. With its help, you can apply the guide rail exactly at the scribe mark. To be able to guarantee this permanently, it must be regularly...
Stopper LA-CS 50/CMS, 492095 New 574796 Festool Stopper LA-CS 50/CMS, 492095 New 574796 Festool

Stopper LA-CS 50/CMS, 492095 New 574796 Festool

€288.19
288,19 € tax excl.
The self-adjusting parallel side fence with opposing clamp ensures exact longitudinal cuts and very convenient working thanks to simple operation from the front. Fine adjustment allows it to be precisely readjusted...
IBFM 474 Floor staples IBFM 474 Floor staples

Thermowell or bushing for flanged floor

€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord laiton ou nickelé Article 474 de l'IBFM Available measures: A mm 6 8 10 12 14 16 18 20 22 B mm 14 18 20 22 25 28 30 32 32 C mm...
Twin pair of blades for stainless steel 115 mm Twin pair of blades for stainless steel 115 mm

Twin pair of blades for stainless steel 115 mm

€41.80
41,80 € tax excl.
Twin 115 mm replacement blades for Stainless Steel for STRIKE double-counter rotating blades. Cutting stability, without burrs No Gyroscope effect (more security) Total or partial cancellation of the forces that...
Twin pair of diamond blades 115 mm Twin pair of diamond blades 115 mm

Twin pair of diamond blades 115 mm

€36.89
36,89 € tax excl.
Twin 115 mm replacement pair of diamond blades for STRIKE double-counter rotating blades. Cutting stability, without burrs No Gyroscope effect (more security) Total or partial cancellation of the forces that tend...
VDS 23/8 Wave LED flashing light LED 12/24/230v VDS 23/8 Wave LED flashing light LED 12/24/230v

VDS 23/8 Wave LED flashing light LED 12/24/230v

€56.56
56,56 € tax excl.
12/24/230v Wave LED flashing light with the possibility of selecting the flashing type for VDS automation devices. 2 covers of your choice in yellow or transparent.
VDS MAYA1 Wall selector with electrobrake VDS MAYA1 Wall selector with electrobrake

VDS BLINDOR Wall selector with electrobrake and pushbutton

€75.00
75,00 € tax excl.
 BLINDOR aluminium Wall selector with electrobrake and pushbutton for automation devices VDS Dimensions: Front Depth 32.5 mm Width 121.5 mm Height 78.5 mm Rear Block Depth 25 mm Width 125.5 mm Height 83 mm
VDS PLA-ABS external wall selector start/stop ABS VDS PLA-ABS external wall selector start/stop ABS

VDS INK Wall selector ABS

€20.49
20,49 € tax excl.
INK Wall selector ABS for VDS automation devices Dimensions: External square front 74x74 mm depth 12 mm Cylindrical box depth 55 mm diameter 58 mm
VDS Kit CARRERA 800 230V for gates up to 800kg VDS Kit CARRERA 800 230V for gates up to 800kg

VDS Kit CARRERA 800 230V for gates up to 800kg

€539.34
539,34 € tax excl.
Kit CARRERA 800 230V for gates up to 800kg Includes: Operator with control unit and built-in receiver and aerial 100602 Fixing plate 100607 Pair of photocells 12/C Flashing light 23/1 (yellow or transparent) Key...
VDS Kit LINEAR11-400 230 v swing gate for gates up to 5 mt VDS Kit LINEAR11-400 230 v swing gate for gates up to 5 mt

VDS Kit LINEAR11-400 230 v swing gate for gates up to 5 mt

€729.51
729,51 € tax excl.
   Kit LINEAR11-400 230 v swing gate for gates up to 5 mt Includes: Operator with brackets and condensers 100018 Control unit with built-in receiver and aerial E 105 Pair of photocells 12/C Flashing light 23/1...
VDS ELT elektrobrake with release cable for ROLL VDS ELT elektrobrake with release cable for ROLL

VDS MAYA1 Wall selector with electrobrake

€58.70
58,70 € tax excl.
 MAYA1 aluminium Wall selector with electrobrake and universal lock for automation devices VDS Dimensions: Depth 44 mm Width 133 mm Height 80 mm
VDS 5 channels transmitter 433 mhz ECO-R VDS 5 channels transmitter 433 mhz ECO-R

VDS warning board

€7.30
7,30 € tax excl.
Warning board also for VDS automation devices
Cutter richiudibile Bessey DBK PH Cutter richiudibile Bessey DBK PH

Wooden narrow Bessey Klemmy HKL

€11.39
11,39 € tax excl.
The narrow Klemmy Bessey, in evaporated beech wood, has the upper arm, the lower arm and the eccentric lever hard wood of high quality and the bearing surfaces of pressed cork for gentle tightening.The vertical...
Vite Testa Piana Svasata Tecfi con impronta a Croce tipo Z Vite Testa Piana Svasata Tecfi con impronta a Croce tipo Z

Brass-plated cross recessed countersunk flat head wood screw

€0.11
0,11 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, brass-plated and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the hardest laminated...
Vite Testa Piana Svasata Tecfi con impronta a Croce tipo Z Vite Testa Piana Svasata Tecfi con impronta a Croce tipo Z

Countersunk flat head wood screw with bronzed cross recess

€0.11
0,11 € tax excl.
Screw flat head countersunk footprint Cross type Z, for chipboard, hardened steel, Bronze plated and waxed. The special PATENTED thread allows a faster, practical and safe clamping even in the toughest laminated woods.
Load More Products
Showing 1-90 of 118 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in