€49.28
49,28 € tax excl.
Reversible stainless steel spring bolt article 300
with automatic closing for iron gates or doors
Filter By
Filter By
Home
Filter By
€27.05
27,05 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
€8.85
8,85 € tax excl.
505 Combi Automatic Pendulum Metal Adjustable Shutter Stopper
Finish: Black painted - Tropicalized
Length: 150 - 215 mm
Measurements as per pictures.
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€11.00
11,00 € tax excl.
Adjustable molded hinge from Ø22x150
2 wings with edge to be welded, pin adjustable by bolt,
with large capacity thrust bearing
€7.70
7,70 € tax excl.
Adjustable metal shutter stop with man's head with reversible stop 502
Length: 110 - 180 mm
Measures looks image.
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€0.89
0,89 € tax excl.
Ball bearing white- zinc.
Internal diameter measurement (F): 9 - 10 - 11 - 12 - 12.5 - 13 - 14 - 20 mm
Measures looks image.
€10.56
10,56 € tax excl.
15 mm tubular handle in curved iron with rectangular mounting plate and fixing with visible screws
Black painted finish
Available in 180 and 230 mm length
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€18.59
18,59 € tax excl.
Cariglione handle 385 Black painted for auction article 393 10x10, for wooden and iron windows Combi
WITHDRAWAL VITHS AT THE PLATE 7 cm
Measures as per images.
€51.92
51,92 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 with key lock for wooden and iron windows
Measures as per images.
€33.88
33,88 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 without key block with cylinder for wooden and iron windows
Measures as per images.
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€84.43
84,43 € tax excl.
Battery arrest at the end of the galvanized cushioned race to pay for sliding gates article 384 Combi
Measures as per images
€6.71
6,71 € tax excl.
Closing system, heavy galvanized vertical slider bolt to be welded article 220 Combi Arialdo
Length from 200 - 300 mm
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€2.58
2,58 € tax excl.
Fisce medium wing hinge to be welded article 240 Combi Arialdo
2 medium wings, right or left fixed pivot
€0.82
0,82 € tax excl.
2-wing hinge in bent sheet metal article 100 Combi Arialdo, removable pin and washer
Length from 60 - 80 - 100 - 120 - 140 - 170 - 200 mm
€5.28
5,28 € tax excl.
Closing system, galvanized padlock door bolt article 284 6x16 Combi Arialdo
€1.65
1,65 € tax excl.
7.5x7.5 galvanized square female wrench for table 231 with Combi Arialdo square profile
€3.27
3,27 € tax excl.
Galvanized table for 230 Combi iron doors
lever closure with male control panel
use of closing of inspectionable counter boxes
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€105.00
105,00 € tax excl.
The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
This pocket sized pH tester is used to monitor pH in laboratories...
€154.92
154,92 € tax excl.
HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.
€13.92
13,92 € tax excl.
Closing system, heavy galvanized padlock door bolt article 286 profile 10x25 Combi Arialdo
€5.44
5,44 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.90
2 open wings, removable pin Ø20, removable washers
€9.30
9,30 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.180
3 open wings, removable pin Ø20, removable washers
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€0.93
0,93 € tax excl.
Iron hinge to be welded with 3 wings 105 Combi Arialdo, removable pin removable washers
Length from 80 - 100 - 120 - 140 - 170 - 200 mm
€0.78
0,78 € tax excl.
Printed hinge 255 Combi Arialdo 2 wings with edge for welding, pin with fixed washer
Height from 40 - 60 - 80 - 100 - 120 - 140 mm
€4.51
4,51 € tax excl.
Hinge printed with rib from Ø22x25x150
2 wings with edge to be welded
with large capacity thrust bearing
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€15.16
15,16 € tax excl.
Large galvanized adjustable hinge hinge for swing gates article 370 Combi Arialdo
Dimensions:
A: 61
B: 46
C: 35
L: 34-46
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€2.65
2,65 € tax excl.
Ratchet for medium tropicalized fanlight with open plate (for Art.265/265T/267) to be welded.
Size C: 2-16 mm
Measures looks image.
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€62.59
62,59 € tax excl.
Long nylon guide olive with support to be fixed for 452PST Combi sliding gates
Diameter Ø 41x240
€51.92
51,92 € tax excl.
Long olive for nylon guide for 452 Combi sliding gates
Diameter Ø 44x220 fixing by M16 bolt
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€2.70
2,70 € tax excl.
Galvanized key for snap latch article 233 Combi
square profile from 6 to 8 with progressive male
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€9.30
9,30 € tax excl.
Closing system, 14 round galvanized deadbolt for 287 Combi Arialdo padlock
€0.70
0,70 € tax excl.
Galvanized Anti-tear with threaded pin for armored door.
Size: M8 - M10
Measures looks image.
€110.00
110,00 € tax excl.
Harness with 1 dorsal anchor point and extension strap + 1 sternal anchor point + 180° rotating positioning belt with 2 side rings and tool holder rings. Adjustable on shoulders and thighs. Chest strap, elastic straps...
€11.88
11,88 € tax excl.
Self-locking drop shutter stop 508 Combi
Finish: Black painted - Tropicalized
Measurements as shown in the images
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€531.97
531,97 € tax excl.
Set AC52F Manual edge bander 1500W Virutex AG98F with edge trimmer and head cutter.
For the application of pre-glued edges in PVC, melamine, wood. It works both on the top and on the shaped or curved. The special...
€0.99
0,99 € tax excl.
Sheared hinge cap article 110 Combi
2 wings, pin with fixed washer to be welded
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€13.85
13,85 € tax excl.
Small galvanized adjustable hinge hinge for swing gates article 370 Combi Arialdo
Dimensions:
A: 44
B: 31
C: 30
L: 31-42
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€22.55
22,55 € tax excl.
Square rod 10x10 for window in galvanized iron article 393
Available sizes: 1500-2000 mm (L)
Measurements as shown in the images.
€28.60
28,60 € tax excl.
Square rod 14x14 for window in galvanized iron article 394
Available sizes: 1500-2000 mm (L)
Measurements as shown in the images.
€5.06
5,06 € tax excl.
Stamped hinge to be welded Ø22 x 150 article 256 Combi
2 wings with rib, fixed pin, removable washer
€9.35
9,35 € tax excl.
Iron pull handle with rectangular mounting plate and fixing with visible screws
Black painted finish
Available in 180 and 230 mm length
€8.80
8,80 € tax excl.
Stylized adjustable metal shutter stop with reversible triangular stop 507 Combi
Finish: Black painted - Tropicalized
Length: 110 - 180 mm
Measurements as shown in the images.
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€900.82
900,82 € tax excl.
Tilting saw 1500W with Virutex TM33W laser
With top table of great precision and power. Equipped with a 300 mm diameter professional blade in 48-tooth carbide, it offers the professional an exceptional cutting...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€8.20
8,20 € tax excl.
Vertical square 14x14 galvanized deadbolt mm. 300 L 320, with 2 pass-throughs to be welded article 210 Combi Arialdo
€3.30
3,30 € tax excl.
Vertical 10x10 zinc-coated vernier bolt to be welded article 215 Combi Arialdo
Length from 150 - 200 - 300 mm
€232.79
232,79 € tax excl.
Virutex SPR770T Clamping support with wheels
Allowing just one person to hold and carry all kind of panels, heavy doors, carpentry parts in wood, aluminum, PVC, etc. Clamp opening from 6 to 110 mm, both are protected...
€4.51
4,51 € tax excl.
Hinge with printed edge article 255 Combi Arialdo from Ø22x150
2 wings with edge to be welded, pin with fixed washer
€5.66
5,66 € tax excl.
Galvanized snap lock for doors article 232 Combi Arialdo
for iron locks with 8.5x8.5 square key hole
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€63.11
63,11 € tax excl.
Hanna Checktemp 1 (HI-98509) is a compact food probe with a stainless steel sensor on a 1m flexible cable. Highly accurate it is designed to take fast response temperature measurements in semi-solids and liquids. The...
Showing 1-90 of 105 item(s)
Italiano
Français
Deutsch
Español