€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€327.87
327,87 € tax excl.
Built-in corner sink with 2 basin and drainer.
Features:
Glossy black finish
Dimensions 830x830x500 mm
Weight 14 Kg
Supplied without mixer tap.
Measures looks image.
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€409.34
409,34 € tax excl.
Stanley Bostitch SB156SL-1-E Punti Serie 92 & SL Cucitrice CT40mm Max
€364.75
364,75 € tax excl.
Characteristics: Aluminum body Ergonomic rubber handle Anti-damage points Depth regulator Adjustable air deflector Safe on contact Oil-free system Rear air exhaust Rear loadingTechnical...
€17.20
17,20 € tax excl.
Features:
SKU: 1800001Z
Length: 4-6-8-10-12-14-16-20-22 mm
Crown width: 11.4 / 12.8 mm
Finish: Galvanized
Point : Clinch
Quantity per box:
10000 pieces of length 4 from to length 14...
€14.60
14,60 € tax excl.
Features:
SKU code: 1840001Z
Length: 4-6-8-10-12-14-16-20-22 mm
Crown width: 11 / 12.3 mm
Finish: Galvanic
Tip: Chisel
Quantity per box:
10000 pieces from length 4 to length. 14...
€154.00
154,00 € tax excl.
Features:
SKU: 1800008Z
Length: 8-10-12-14-16 mm
Crown width: 11.4 / 12.8 mm
Finish: Inox
Point : Clinch
Quantity per box:
10000 pieces of length 8 from to length 14
5000 pieces only...
€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€124.59
124,59 € tax excl.
46W butane/propane gas hot air generator 10 kW, completely made of stainless steel. Manual ignition with piezoelectric system. Excellent for heating farms, construction sites, etc. Flame control, electric power cable,...
€13.93
13,93 € tax excl.
Features:
Length: 15-18-19-22 mm
Crown width: 35 mm
Finish: Liquor
Quantity per box:
2000 pieces of length 15 from to length 22
Compatible with:
Atro, Senco, Prebena, Ober, Duo Fast, Makita,...
€237.00
237,00 € tax excl.
Features:
Length: 15-19-22 mm
Crown width: 35 mm
Finish: Liquor
Quantity per box:
24000 pieces of length 15 from to length 22
Compatible with:
Atro, Senco, Prebena, Ober, Duo Fast, Makita, Dewalt,...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€68.85
68,85 € tax excl.
ERP high efficiency convector, shutdown timer, weekly programming, automatic energy saving system, control screen, T ° adjustment between 10 ° and 49 °, remote control included, 2000 W.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€29.51
29,51 € tax excl.
2 large gusseted front pockets, coin pocket, side pocket for tools, multi-functional side pocket with mobile phone holder and detacheable badge holder, 2 back pockets, one with zip, hammer loop.
Stretch insert at hip...
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€28.02
28,02 € tax excl.
3 power levels (750 - 1250 - 2000 W) Adjustable room thermostat Safety thermostat against overheating Side handles for transport Anti-scratch plastic feet Coverage area 20 m2 ELECTRICAL POWER SUPPLY 750 - 1250 - 2000...
€18.03
18,03 € tax excl.
Features:
power level 1000-2000W
Thermal bath: IP21 protection level
Adjustable room thermostat
Overheating safety thermostat
Summer ventilation function
Top handle
Voltage: 230V 50Hz
Dimensions:...
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€148.00
148,00 € tax excl.
Features:
SKU Code: 110
Length: 20 - 25 - 30 - 32 - 35 - 40 - 45 - 50 - 60 - 65 mm
Crown width: 11.1 mm
Finish: Galvanized
Quantity per box:
- 20,000 pieces 20/25/30 mm
- 16800 pieces 32 mm
- 10000...
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€180.33
180,33 € tax excl.
Infrared heater mushroom in powder coated steel, automatically connected tube, professional handwheel burner with MIN-MAX and STAND-BY, piezoelectric ignition, anti-fall valve. Black colour.
FEATURES:
-...
€44.26
44,26 € tax excl.
With high efficiency mineral oil. Adjustable and safety thermostat (anti-overheating). Illuminated switches to signal operation. Anti-burn front handle. Cable wrap support. 360 ° swivel wheels. 230V/50Hz power supply....
€32.70
32,70 € tax excl.
Features:
2 power levels (1000/2000W)
Thermobath: IP21 protection level
24 hour timer
Adjustable room thermostat
Overheating safety thermostat
Summer ventilation function
Control panel protected by a door...
€138.52
138,52 € tax excl.
Hot air generator butane/propane gas from 11 to 18 kW, completely in stainless steel. Manual ignition with piezoelectric system. Ideal for heating farms, construction sites etc .. Flame control, electric power supply...
€196.72
196,72 € tax excl.
Infrared rays heater in epoxy-coated steel 12 kW, automatically joined hose, professional handwheel burner with MIN-MAX and STAND-BY position, piezoelectric ignition, anti-tilt switch off safety device. Colour black.
€200.82
200,82 € tax excl.
Electric infrared heating lamp with IPX4 protection degree (outdoor use admit). Ideal for heating terraces, balconies, patios and every outdoor areas. Three power levels: 800W / 1200W / 2000W. Equipped with...
€25.41
25,41 € tax excl.
PVC cloche Ø 21 cm spare for cold smoker Kemper.
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€245.90
245,90 € tax excl.
Stanley Bostitch 21680B-LN-E 80 Stapler for staples Series 80 up to 16mm (216) Long Nose
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€245.90
245,90 € tax excl.
Built for higher volumes, pneumatic control ensures consistent clinching with minimal effort. Ideal for shipping lines, it offers a top seal with long-lasting tightness.
Features:
Ergonomic rubber grip
Trigger...
€237.70
237,70 € tax excl.
Built for higher volumes, pneumatic control ensures consistent clinching with minimal effort. Ideal for shipping lines, it offers a top seal with long-lasting tightness.
Features:
Ergonomic rubber grip
Trigger...
€549.17
549,17 € tax excl.
CR Series Fasteners:
Diameter: 3.05 - 3.4mm
Length: 19 - 45 mm
Head: 10.1 (Min.) 10.1 (Max.)
Collation angle: 15
Features:
Magnesium body
Ergonomic rubber handle
Depth adjustment
Safe in contact...
€490.98
490,98 € tax excl.
Stanley Bostitch stapler S2-16WC sequential 38mm max. with contact trigger replacement S2638-2-E
Diameter: 1.4 mm
Crown: 25 - 25 mm
Length: 13 - 38 mm
€163.11
163,11 € tax excl.
The 21680B-E is the ideal tool for difficult access, but its compact design makes it suitable for use in heavy-duty applications. With a magazine capacity of 125 Series 80 staples up to 16mm and weighing just 0.8kg,...
€196.72
196,72 € tax excl.
With user-friendly features such as Dial-A-Depth for quick countersinking adjustments and a selectable trigger system, the SX1838-E stapler will make light work of construction stapling applications. This rugged tool...
€179.51
179,51 € tax excl.
Stanley Bostitch 21684B-E stapler for 84 Series staples up to 16 mm (216)
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€6.48
6,48 € tax excl.
Short socks with an innovative design. the coolmax® fabric combined with a special fabric process providing extra ventilation, allowing the feet to remain dry and cool even during the warmer seasons.
Stretch support...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€490.98
490,98 € tax excl.
Stanley Bostitch 438S2-1 pneumatic stapler
€159.02
159,02 € tax excl.
Stanley Bostitch BT1855-E Brad Stapler ST 55MM MAXThe new BT1855-E tool is the most feature-rich brad nailer on the market and is packed with features to meet the needs of today's construction users.
€564.75
564,75 € tax excl.
Stanley Bostitch CF-15-1-E Stapler CF15-CT 15MM MAX
€99.50
99,50 € tax excl.
High penetration concrete nails with high carbon content, tropical galvanic finish.
Features:
Length: 20-30-40-50 mm
Head 2.8-3.2 mm
Diameter 1.8 mm
Quantity per box:
3000 pieces length 20 mm1500 pieces...
€170.49
170,49 € tax excl.
Stanley Bostitch stapler A/35 19&22MM manual mechanical MS-3522-E
Diameter 0.8 (Min.) 2.25 (Max.) mm
Length 19 (Min.) 22 (Max.) mm
€893.44
893,44 € tax excl.
Stanley Bostitch N8090CB-1 ML-E coil nailer CT 90MM MAX
€433.61
433,61 € tax excl.
Stanley Bostitch Pneumatic Stapler AR 15&19 MM
€622.95
622,95 € tax excl.
Stanley Bostitch Pneumatic Stapler AR 22 MM
€549.17
549,17 € tax excl.
Stanley Bostitch RN46-1 Roofing Nailer-Ct 45MM
€159.10
159,10 € tax excl.
Stanley Bostitch Tool Combo-St 2IN1 BT/SXThe SB-2 IN 1 is the most flexible tool on the market. This nailer-stapler is perfect for "do-it-yourself" jobs or in cases where you need both a stapler and a nailer.Uses 15...
€450.00
450,00 € tax excl.
SB-HC50FN HCFN Concrete Block Nail-ST 50 MMSpecially designed to drive tungsten-hardened nails into almost any type of cinder block, the HC50FN can fasten door casings to cinder blocks and lock rods to floor guides....
€286.89
286,89 € tax excl.
Stanley Bostitch TU-216-2330K-E 23 G Headless Pin Stapler 30 MM Max
€4.84
4,84 € tax excl.
Features:
Staple remover is made of chromed metal
Necessary tool for neat and clean removal of stitches
€491.72
491,72 € tax excl.
Stanley Bostitch SB150SLBC-1-E Stapler for staples and washersCharacteristics: Aluminum body Ergonomic rubber handle Adjustable air deflector Safe on contact Bottom loading Plastic washer...
€8.93
8,93 € tax excl.
Features:
SKU: 1640001Z
Length: 4-6-8-10-12-14 mm
Crown width: 11.3 mm
Finish: Galvanized
Quantity per box: 10000 pieces
Compatible with:
Atro, Senco, Prebena, Ober, Duo Fast, Makita, Dewalt, Bosch,...
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€49.18
49,18 € tax excl.
The Crisp HY130DB work coverall is made of a durable polyester and cotton blend, which ensures resistance and durability over time. The fit is comfortable and allows freedom of movement during work. The coverall is...
€27.05
27,05 € tax excl.
SUMMER WORK SHORTS Art. EY132GI SLIM FIT
Material Cotton canvas 97% / Spandex 3%, 220 gr
Bermuda with triple stitching, front zip closure.
Double reinforcement fabric on the back.
Red ribbon/re ex on back tubular...
€64.75
64,75 € tax excl.
Low, light and comfortable U-Power safety shoes from the Red Lion line, with ultra-breathable nylon upper and soft suede, aluminum toe cap, anti-puncture, anti-slip and PU/PU Infinergy sole, S1P SRC ESD
-...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€532.79
532,79 € tax excl.
The DSA-3519-E cordless box stapler is designed to drive from 15 mm to max 19 mm staples and is ideal for manufacturers and distributors as well as for working off-site. It can be used to seal both single and double...
€22.55
22,55 € tax excl.
Hinges for heavy and fire doors with 2-wing bearing
to screw on doors
Max load: 2 hinges 80 Kg
€31.97
31,97 € tax excl.
Hinges for heavy and fire rated doors with 3-wing bearing
to screw on doors
Max load: 2 hinges 150 Kg
Showing 1-90 of 117 item(s)
Italiano
Français
Deutsch
Español