€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€6.48
6,48 € tax excl.
Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut.
Dimensions:
Length 25 cm
Width 38 cm (handles included)
€4.92
4,92 € tax excl.
Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 21 cm
Width 16 cm
€4.92
4,92 € tax excl.
Pizza roller made of beech wood, ideal for preparing pizzas and doughs.
Dimensions:
Length 23 cm
Width 13 cm
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Diameter Ø 38 mm
Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 28.5 cm
Large: Length 34 cm
€1.31
1,31 € tax excl.
Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 26.5 cm
Large: Length 33.5 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small with 2 Pockets: Length 32 cm - Width 20 cm
Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 33 cm
Width 6 cm
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€2.38
2,38 € tax excl.
Ideal for extracting juice from citrus fruits such as oranges, lemons, limes, etc. Round handle that comfortably fits in the palm of the hand, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Max...
€2.01
2,01 € tax excl.
Cover for CAB-E or CIR SFS intec poised hinge adaptable invisible
€4.92
4,92 € tax excl.
Flower-shaped trivet made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 23.5 cm
Width 18 cm
€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
€4.92
4,92 € tax excl.
Giant pencil holder with 4 holes for pens and pencils, made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Width 4 cm
Height 4 cm
Length 20 cm
€13.00
13,00 € tax excl.
Guitar pasta cuts obtained by cutting the best beeches, handcrafted in Abruzzo according to high-quality techniques.
Dimensions:
Length 47 cm (including screws)
Width 23 cm
Height 7,5 cm
Features:
It's a...
€17.13
17,13 € tax excl.
Ham holder made by cutting the finest beechwood, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Base: Length 40 cm - Width 19 cm - Height 2.5 cm
Handle: Length 64 cm - Width (with handle...
€5.90
5,90 € tax excl.
Box made of faesite, handcrafted in Abruzzo using high-quality techniques.
Available in:
Small: Length 17.5 cm - Width 11 cm - Height 6 cm
Medium: Length 29 cm - Width 17 cm - Height 7.5 cm
Large: Length 33 cm -...
€5.57
5,57 € tax excl.
Tray made by cutting the finest beech trees, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small 30x17 cm
Large 35x17 cm
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€0.82
0,82 € tax excl.
Honey dipper dispenser made of beech wood, suitable for pairing with smaller jars, honey favors, and wedding favors.
Available in 2 sizes:
Small 8 cm
Large 11.5 cm
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€3.69
3,69 € tax excl.
Key-shaped plywood key holder with 4 hooks, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Width 25 cm
Height 9 cm
€13.11
13,11 € tax excl.
Homemade pasta kit including: chitarra pasta cutter, a traditional Abruzzese tool used to make spaghetti alla chitarra or maccheroni alla chitarra. It consists of steel strings stretched over a wooden frame and a...
€11.80
11,80 € tax excl.
Homemade pasta kit including: Pasta cutting guitar, a traditional Abruzzese tool used to make spaghetti alla chitarra or maccheroni alla chitarra. Made with steel wires tightly stretched on a wooden frame. Smooth...
€30.25
30,25 € tax excl.
Kitchen kit consisting of: Poldino Polpettino, a kitchen utensil that allows you to make 70 meatballs or other types of dough in one move. Chitarra pasta cutter, a traditional Abruzzese tool for making spaghetti or...
€8.20
8,20 € tax excl.
MDF cutlery holder with three kitchen accessories: ladle, fork, spoon. Handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Width 10.5 cm
Height 16.5 cm
Length 8 cm
€7.21
7,21 € tax excl.
Miniature guitar made of beech wood, ideal for children's entertainment or as a decorative item for your home. Includes a mini rolling pin made of beech wood, 8 cm.
Dimensions:
Length 10 cm
Width 15.5 cm
Height...
€5.74
5,74 € tax excl.
Tropicalized steel spring safety ratchet
Replacement accessory for wooden folding tables, beer tables, restaurants and wooden benches.
60x70 mm base - Height 37 mm
Slotted hole spacing 40 - 60 mm
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€6.56
6,56 € tax excl.
Oval trivet made of MDF with laminates on the top and bottom, handcrafted in Abruzzo using high-quality techniques.
Available with red or yellow handles.
Dimensions:
Length 24.5 cm (including handles)
Width 19 cm
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€2.50
2,50 € tax excl.
Ridged rolling pin in beech wood, ideal for preparing pappardelle.
Dimensions:
Length 32 cm
Ridge spacing 16 mm
€18.00
18,00 € tax excl.
Kitchen set including: Spaghetti cutting rolling pin + Tagliatelle cutting rolling pin + Wide tagliatelle cutting rolling pin + Pappardelle cutting rolling pin, all made of beechwood, and a plywood rolling pin holder....
€0.85
0,85 € tax excl.
Round cooking and dairy spoon made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 24 cm
Large: Length 30 cm
€4.10
4,10 € tax excl.
Round trivet made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Available with red or yellow handles.
Dimensions:
Length 20 cm
Width 22 cm (including handles)
€110.00
110,00 € tax excl.
Harness with 1 dorsal anchor point and extension strap + 1 sternal anchor point + 180° rotating positioning belt with 2 side rings and tool holder rings. Adjustable on shoulders and thighs. Chest strap, elastic straps...
€13.11
13,11 € tax excl.
Homemade pasta kit including: chitarra pasta cutter, a traditional Abruzzese tool used to make spaghetti alla chitarra or maccheroni alla chitarra. It consists of steel strings stretched over a wooden frame and a...
€1.56
1,56 € tax excl.
Hinge anuba 14 steel door and window frames SFS intec wheelbase 13.6 mm
€113.31
113,31 € tax excl.
SFS intec Set - Wire Application - matched 13/14
€113.31
113,31 € tax excl.
Set - wire application - matched by 9/11 for doors and window frames SFS intec
€3.20
3,20 € tax excl.
Adjustable hinge 11R by 14 for wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€39.05
39,05 € tax excl.
15 mm door closer with two strips for flush fire doors
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges 14 SFS intec for 11 R
€1.35
1,35 € tax excl.
Hinge anuba 16 steel for door and window frames SFS intec distance 15.6 mm
€1.78
1,78 € tax excl.
Hinge Anuba Z Steel 14 for door and window frames SFS intec center distance 13.6 mm
Stem off-axis for special applications.
€12.55
12,55 € tax excl.
Hinge stainless steel Anuba 14 for door and window frames SFS intec wheelbase 13.6 mm
€1.54
1,54 € tax excl.
Hinge anuba 11 steel door and window frames SFS intec wheelbase 10.9 mm
€3.93
3,93 € tax excl.
Hinge anuba 14 steel for door and window frames SFS intec distance 13.6 mmType extended POMELLAS effect
€2.45
2,45 € tax excl.
Hinge anuba 14 steel for door and window frames SFS intec wheelbase 13.6
With blocking system for wasistas
€2.24
2,24 € tax excl.
Hinge anuba 16 steel door and window frames SFS intec wheelbase 15.6 mm
€1.54
1,54 € tax excl.
Hinge anuba 9 steel door and window frames SFS intec wheelbase 9.9 mm
€2.46
2,46 € tax excl.
SFS hinge for PVC windows and multi-material applications.
Male with 3-screw mounting
Female with m7x40mm pin
Body diameter 15 mm, brass finish.
SFS products are characterised by load resistance, design...
€106.91
106,91 € tax excl.
Set - knocker application for adaptable hinges from 15 SFS intec for 11 R and 12 R long without air
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges from 20 SFS intec for 11 R and 12 R Long
€114.67
114,67 € tax excl.
SFS intec Set - Wire Application - matched 14/16
€167.65
167,65 € tax excl.
Set - Wirw Application adaptable hinges from 14 to 11R SFS intec
€167.65
167,65 € tax excl.
Set - Wire Application adaptable hinges from SFS intec 15 to R 11 and R 12 short
€167.65
167,65 € tax excl.
Set - Wire Application for adaptable hinges from 20 SFS intec for 11 R and 12 R Long
€1.50
1,50 € tax excl.
Hinge anuba 13 steel door and window frames SFS intec wheelbase 12.6 mm
€1.56
1,56 € tax excl.
NAS packing tape with silent unwinding for general use, suitable for light and medium packaging in the food and beverage sector and for packing applications. Water-based adhesive, free from solvents and other harmful...
€1.56
1,56 € tax excl.
NAS packing tape with silent unwinding for general use, suitable for light and medium packaging in the food and beverage sector and for packing applications. Water-based adhesive, free from solvents and other harmful...
€39.79
39,79 € tax excl.
Single galvanized door closer 15 SFS intec
€3.30
3,30 € tax excl.
Smooth rolling pin made of beech wood, ideal for preparing puff pastry, pizzas, buns, piadine, etc..
Available in 3 sizes:
32 cm
50 cm
60 cm
€7.13
7,13 € tax excl.
Serving board made of spruce wood, ideal for pizza, polenta, cured meats, cheeses, etc. Handcrafted in Abruzzo using high-quality techniques.
Available in 4 sizes with a thickness of 1.8 cm:
Small Ø 30 cm
Medium...
€2.50
2,50 € tax excl.
Ridged rolling pin in beech wood, ideal for preparing spaghetti.
Dimensions:
Length 32 cm
Ridge spacing 4 mm
€2.50
2,50 € tax excl.
Spaghetti measurer made of beech wood, with four holes to insert spaghetti before cooking to determine the quantity. Below each hole, the quantity for the number of servings is indicated.
Dimensions:
Length 28.5...
€5.21
5,21 € tax excl.
Anuba hinge 20 in steel with 3 legs, removable pin with bushings
wear resistance for SFS intec doors and windows, center distance 33 mm
€5.76
5,76 € tax excl.
Anuba hinge 18 in steel with 3 legs, removable pin with bushings
wear resistance for SFS intec doors and windows, center distance 23 mm
€2.50
2,50 € tax excl.
Ridged rolling pin in beech wood, ideal for preparing tagliatelle.
Dimensions:
Length 32 cm
Ridge spacing 6 mm
€4.10
4,10 € tax excl.
Tiered match holder in natural beechwood, wall-mounted, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Width 9 cm
Height 17 cm
€2.50
2,50 € tax excl.
Ridged rolling pin in beech wood, ideal for preparing wide tagliatelle.
Dimensions:
Length 32 cm
Ridge spacing 8 mm
€61.89
61,89 € tax excl.
Adjustable hinge INOX 11R of 15 short 92 mmfor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€59.58
59,58 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
CABR-3D poised hinge adaptable
male without milling
For panel thickness from 40-45 mm
Adaptable 0 /+ 3 mm height, +/- 1.5 mm laterally, +/- 2 mm depth
€70.00
70,00 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
CABR-3D poised hinge adaptable
male without milling
For panel thickness from 40-45 mm
Adaptable 0 /+ 3 mm height, +/- 1.5 mm laterally, +/- 2 mm depth
€59.33
59,33 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
CABR-3D poised hinge adaptable
male without milling
For panel thickness from 40-45 mm
Adaptable 0 /+ 3 mm height, +/- 1.5 mm laterally, +/- 2 mm depth
€59.33
59,33 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
CABR-3D poised hinge adaptable
male without milling
For panel thickness from 40-45 mm
Adaptable 0 /+ 3 mm height, +/- 1.5 mm laterally, +/- 2 mm depth
€1.11
1,11 € tax excl.
Gnocchi board made of beech wood with double ridged surface and a handle for easier use.
Dimensions:
Length 20 cm
Width 6 cm
€72.85
72,85 € tax excl.
Just 3D Adjustable Hinge for solid and upholstered wood framesAdjustable +/- 2.5 mm in height, laterally and in depth
€6.23
6,23 € tax excl.
Nutcracker barrel made of beech wood, with a threaded screw, practical and easy to handle.
Dimensions:
Length 14 cm
Width 8 cm
Showing 1-90 of 106 item(s)
Italiano
Français
Deutsch
Español