€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€11.64
11,64 € tax excl.
180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA
Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€33.29
33,29 € tax excl.
Fall arrest cable in galvanized steel Ø 6x133, wires and protection with PVC sheath (retractable), necessary for the CE marking of swing gates (UNI EN 12604: 2002) maximum bearable weight of 1800 kg.
€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel.
Door position: Hinges for flush doors
Installation circumstances: Prominent hinge
Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€28.89
28,89 € tax excl.
The patented PASCAL hinge is proposed as an innovative solution for gates with one or two leaves or for industrial doors, even large ones, with the following advantages:
Assembly speed
Elimination of large...
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€5.74
5,74 € tax excl.
Aluminum blow gun for any use with short nozzle Working pressure: 1.0 - 6.0 bar
€8.20
8,20 € tax excl.
Aluminum blow gun for any use with 150 mm long barrel Working pressure: 1.0 - 6.0 bar
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw.
18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
€27.79
27,79 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 1 m foldable in shapeable copper Working pressure: 1.0 - 6.0 bar
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€43.76
43,76 € tax excl.
Central steel carriage for sliding folding doors Rolling Center 4 Wheels D.50 Hole D.16 Central art.CA 4RP
Measures looks image.
€4.10
4,10 € tax excl.
SH System Holz brand hinge, for furniture and kitchen doors. External rebate neck on the frame, negative angle assembly at 45°.
- Hole on door mm. 35.
- Depth of the metal box 11 mm.
- Opening 94°.
- Possibility...
€29.51
29,51 € tax excl.
2 large gusseted front pockets, coin pocket, side pocket for tools, multi-functional side pocket with mobile phone holder and detacheable badge holder, 2 back pockets, one with zip, hammer loop.
Stretch insert at hip...
€3.69
3,69 € tax excl.
Double-bit insert key 3, powder-coated black zamak Emka 1004-05
€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A)
material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
€7.38
7,38 € tax excl.
material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...
€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
€8.11
8,11 € tax excl.
Profile hinge zinc plated with weld-on stud raw cover stainless steel.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Prominent hinge...
€8.93
8,93 € tax excl.
Button closure in chrome-plated zamak without seal.
€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Concealed hinge
Opening angle:...
€12.91
12,91 € tax excl.
135 ° hinge with stop for 20/25 mm doors
€17.21
17,21 € tax excl.
Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.
€35.60
35,60 € tax excl.
Fall arrest cable in galvanized steel Ø 6x133, wires and protection with PVC sheath (retractable), necessary for the CE marking of swing gates (UNI EN 12604: 2002) maximum bearable weight of 1800 kg.
€10.24
10,24 € tax excl.
Used on large capacity trolleys for both external and internal movement
Available diameter in mm: 40 - 48 - 60 - 65 - 80
€51.64
51,64 € tax excl.
3-meter round galvanized guide for Rollin Center Floor sliding doors.
Galvanized guide 55x16x3000 35/10 x Round D.20 Drilled for floor fixing
The new guide designed and built for gates and doors, suitable for...
€22.13
22,13 € tax excl.
Round groove grooved wheel - O2 in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€26.23
26,23 € tax excl.
V-groove grooved wheel - V2 in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€31.29
31,29 € tax excl.
€16.31
16,31 € tax excl.
180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated.
Adjustable torque
Holds any position continuously at adequate load...
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€121.23
121,23 € tax excl.
Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel
EMKA 1054-U39
€21.23
21,23 € tax excl.
Pneumatic inflating gun body in shockproof nylon - Manometer diameter mm. 63 - Tube length mm. 400 - Brass head
€4.10
4,10 € tax excl.
SH System Holz Series 370 brand hinge, for inline doors of furniture and kitchens.Hole on door mm. 35. Depth of the metal box 11 mm. Opening 90°. Adaptable to all traditional 370 Series bases and to all Domi...
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€4.10
4,10 € tax excl.
Key EK 333, nickel silver with black polamide head for EMKA locks.
€9.84
9,84 € tax excl.
Key for insert Square 9, railway version, Zinc die black powder-coated.
€2.87
2,87 € tax excl.
Key for insert square 6 mm, Zinc die black powder-coated.
€3.28
3,28 € tax excl.
Key for insert square 7 mm, Zinc black powder-coated.
€4.10
4,10 € tax excl.
Key for insert triangular 10 mm, Zinc black powder-coated.
€3.28
3,28 € tax excl.
Key for insert triangular 7 mm, Zinc black powder-coated.
€3.69
3,69 € tax excl.
Key for insert triangular 8 mm, Zinc black powder-coated.
€79.90
79,90 € tax excl.
L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860
€20.60
20,60 € tax excl.
End stop for sliding doors with floor fixing art. F 40 SZ Rolling Center
Measurements as per images.
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€12.30
12,30 € tax excl.
V-groove grooved wheel - V1 in iron for normal C45 sliding gates with 1 Rolling Center bearing
Measurements as per images.
€14.10
14,10 € tax excl.
RP Rolling Center nylon pulley for rope
Available bearing(di) diameter: 12-15 mm
Diameter pulley: 80-90-100-120 mm
Measures looks image.
€8.86
8,86 € tax excl.
Nylon wheel D.60x17 throat V C / Cusc. bolt M10 and 2 bushings, Article 617VN for gates and low noise grates
€7.20
7,20 € tax excl.
€98.36
98,36 € tax excl.
Tank - Nylon 680 cc Body - Nickel-plated sandblasted brass Cap - Nickel-plated brass Needle / Springs / Nozzle - Stainless Steel Adjustments - Product / range Weight 780 g Operating pressure 3.0 - 3.5 bar Air...
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€17.46
17,46 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 150 mm curved Working pressure: 1.0 - 6.0 bar
€6.96
6,96 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...
€4.44
4,44 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core
€36.93
36,93 € tax excl.
Right/left lock for 30x10 rod for sliding and folding door Rolling Center art.36.
Available: Right - Left
Measures looks image.
€121.31
121,31 € tax excl.
Rolling Center Small guide 70x60 Sp. 3,5 Bar from Ml.3 for sliding and folding door art.GIPI 4 RPZ 3
Measures looks image.
€10.16
10,16 € tax excl.
Tropicalized steel pulley for RT Rolling Center rope.
Used in overhead door mechanisms, garages, automatic openings, automation systems, rope handling, traction of objects, etc...
Pulley diameter: 60-80-90-100-120...
€20.30
20,30 € tax excl.
Long screwable three-piece 180 ° hinge with 2 holes 8.4 mm in galvanized steel, pin and washer in nickel-plated brass 1039-U15 EMKA
Length 91 mm, Height 55 mm
€10.66
10,66 € tax excl.
Sealing profile in NBR 80 ° Shore A for 6 mm glass and 2 mm sheet metal, with Z shape for sealing profiles
€1.56
1,56 € tax excl.
Hinge anuba 14 steel door and window frames SFS intec wheelbase 13.6 mm
€113.31
113,31 € tax excl.
SFS intec Set - Wire Application - matched 13/14
€113.31
113,31 € tax excl.
Set - wire application - matched by 9/11 for doors and window frames SFS intec
€3.20
3,20 € tax excl.
Adjustable hinge 11R by 14 for wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€39.05
39,05 € tax excl.
15 mm door closer with two strips for flush fire doors
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges 14 SFS intec for 11 R
€1.35
1,35 € tax excl.
Hinge anuba 16 steel for door and window frames SFS intec distance 15.6 mm
€1.78
1,78 € tax excl.
Hinge Anuba Z Steel 14 for door and window frames SFS intec center distance 13.6 mm
Stem off-axis for special applications.
Showing 1-90 of 147 item(s)
Italiano
Français
Deutsch
Español