Angle grinder 1200W, 125 mm Flex L 12-11 125

Reference:
447.676

Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature control, electronics with speed stabilization. High efficiency motor for high performance. Anti-Kickback, disengages the motor in the event of disc jam.

Characteristics:

  • Absorbed power 1200W
  • Voltage 230V
  • Frequency 50/60Hz
  • Max. disc diameter 125 mm
  • No-load speed 11500 rpm
  • M14 attachment
  • Cable length 4.0 m
  • Dimensions LxWxH 300x75x105 mm
  • Weight 2.0 Kg

Supplied accessories:

  • Sanding hood (436860)
  • Clamping flange (335282)
  • Clamping nut M14 (100080)
  • Service key (100110)
  • Handle (450774)
€149.00
149,00 € tax excl.
Available in stock 1 Item
Add to wishlist
Description
Product Details
447.676
Made IN
China
You may also like
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
other products in the same category:
€139.34
139,34 € tax excl.
Makita UC3041A Electric Chainsaw 1800W 30 cm Ergonomic soft grip New adjustment lever for easier tool-less saw chain/tension adjustment New design harpoon Technical data: Chain Pitch 3/8" Max cutting width...
€69.59
69,59 € tax excl.
Valex EX150S bench grinder Valex EX150S bench grinder Steel wire brush ø150xø12,7x20mm Die-cast aluminum and steel structure Adjustable piece support
€22.05
22,05 € tax excl.
Heat gun 2000 W, temperatures 350 ° - 600 ° - power W - 1000/2000 - switch lock - YES - temperature ° C - 350-600 - air flow l / min - 480 - display - NO - net weight kg - 0,650
€155.66
155,66 € tax excl.
Valex Team 50 lubricated coaxial compressor, 2Hp engine, 50 lt tank, Max pressure 8bar FEATURES Engine 2 Hp Tank 50 lt Max pressure 8 bar With pressure regulator TECHNICAL DATA Tank l: 50 Power HP / kW:...
€654.48
654,48 € tax excl.
Characteristics:    Accepts SDS-MAX bits    AVT vibration reduction system    Electronic speed regulator    Chisel adjustment on 12 positions    LED signal indicating the wear of the brushesTechnical data:    Power...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions. Power 2000W No-load speed 6500 rpm...
€39.26
39,26 € tax excl.
Valex 180 W multifunction for cutting, sanding, scraping FEATURES For cutting wood, plastic and similar materials, sanding wood and metals, scraping mastics, glues and carpeting Switch block TECHNICAL DATA...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter. Power KVA max 5.5 Engine 13 Hp Displacement 389 cc Voltage 230V Single-phase synchronous...
€73.69
73,69 € tax excl.
Vacuum cleaner with 4 swivel wheels - 31 mm diameter accessory attachment - Accessory housing on the machine body - Blowing function. Power 1200W Air flow 29 l/s Depression 190 (+/- 5%) mbar Drum capacity 20...
€78.82
78,82 € tax excl.
Angle grinder 840W 125 mm 9558PBGY    Bevel gear obtained by milling from solid    Optimized dust protection system with sealed bearings and electrical parts covered with protective paints    Blade lock...
€1,007.38
1.007,38 € tax excl.
- No-load speed: 3,200rpm - Power consumption: 1.800Watt - Dim. Lxwxh: 898x664x725mm - Cable length: 2.5m - Weight (EPTA): 29.5kg - Ø blade: 305mm - Blade hole: 30mm - DXT deep & exact cutting technology. -...
€299.18
299,18 € tax excl.
Characteristics:    Removal capacity from 0 to 4 mm    Quick replacement of knives    Chip discharge on both sidesTechnical data:    Rebate capacity 23 mm    Plate length 296 mm    Max removal 0 - 4.00 mm    Power...
€245.00
245,00 € tax excl.
Makpac TM3010CJ multifunction tool, ergonomic handle, 3.2° oscillation, accessory coupling in 12 different positions, speed adjustment, constant speed under load, slow start and quick attachment of accessories....
€15.49
15,49 € tax excl.
Branding iron Set BM 245 for inscribing and creative drawing on wood, leather and cork 6 writing and drawing points of various line width as well as a stamp set with 7 different patterns are included as accessories...
€66.42
66,42 € tax excl.
Compact and lightweight    Labyrinth construction to protect bearings from dust    Sealed bearings    Armature and stator with anti-dust paint    Reduced noise level    Grease leakage protection    360° adjustable...
€95.00
95,00 € tax excl.
Powerful 1000W motor for high performance. Compact design: only 276 mm in length and 2.1 kg in weight for better handling. Accidental Restart Protection (LLO). Soft start. Resistant protective cover adjustable...
€187.70
187,70 € tax excl.
Features: Double sealed bearings, dust protection Ergonomic handle Quick blade engagement Self-releasing brushes Voltage 220 V Power consumption 1200 Watts Dim.lxwxh 447x97x176 mm Cable length 4 m Weight...
€17.95
17,95 € tax excl.
Can be powered from the charging station or directly on the gun. Interchangeable nozzle. Power 15(80)W Glue stick Ø 12 mm Extrusion 15 gr/min Heating 5 minutes Temperature 190°C Net weight 0.440 Kg
€240.00
240,00 € tax excl.
Characteristics:    Brushes accessible from the outside    Reversible    Electronic speed switch    High tightening torque 200 NmTechnical data:    Bolt capacity M10 - M16    Tension bolt capacity M10 - M12    Power...
€388.79
388,79 € tax excl.
Characteristics:    Quick blade attachment    Equipped with LED lighting    Speed ​​regulator    Using jigsaw bladesTechnical data:    Wood cutting capacity 55 mm    Steel tube cutting capacity Ø 25 mm    Blade stroke...
€245.08
245,08 € tax excl.
Features: Ergonomic handle 3,2° of oscillation Accessory insert on 12 different positions Speed adjustment Constant speed under stress Slow start Technical data: Power consumption 320W No-load speed...
€44.67
44,67 € tax excl.
Instantaneous adjustable soldering iron 200W FEATURES Led to illuminate the welding area Tip temperature adjustment: 70-200 ° polystyrene cut, 200-350 ° normal use, 350-500 ° pyrograph for wood Soft grip...
€273.66
273,66 € tax excl.
 Makita GD0810C straight grinder Extended Warranty for 3 years Features: collet capacity _ 8 mmCollar long aluminum for processing into moldselectronic speed controlconstant speed even under stressSJS system that...
€233.00
233,00 € tax excl.
Characteristics:    Rack chuck    Only 66 mm height of the tool head to ensure use in difficult to reach areas    Side holes for using additional handle    Speed ​​pre-selector applied on the switch    Selection of...
Questions (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Menu

Create a free account to use wishlists.

Sign in