Blum Tandem plus wooden drawer guide pair with Blumotion 560H
Reference:
560H5500B
Pair of Tandem plus Blumotion wooden drawer guides with full extension and concealed closure with Blumotion soft closing
€29.96
29,96 € tax excl.
Calculate Shipping Cost
Add to wishlist
Characteristics:
- TANDEM full-extension concealed with integrated BLUMOTION for smooth and silent closing.
- TANDEM inside - an almost suspended race - for the entire life of the furniture
- Suitable for use with SERVO-DRIVE - the electric opening support
- Tool-free vertical adjustment via clutch
- Integrated tool-free front tilt adjustment
- Lateral and depth tolerance compensation
You may also like
other products in the same category:
€15.49
15,49 € tax excl.
Wheel for underbed furniture also suitable for the linear movement of furnishing modules.
Features:
With locking brake
Wheel diameter 75 mm
Load capacity 80 kg
Gray Color/Finish
Apply on the internal side of...
€5.66
5,66 € tax excl.
Round nylon wheel with flared hole with bearing for sliding door.
External diameter of the wheel 19 mm: Ø flared inner 7 mm, Ø opposite inner 5 mm, Thickness 5 mm
External diameter of the wheel 23-25-27 mm: Ø...
€87.21
87,21 € tax excl.
Blum LEGRABOX assembled large drawer with dynamic load capacity of 100,000 opening and closing cycles.
Side height: C (177 mm) - F (241 mm)
External dimensions of the mobile unit: 30 - 40 - 45 - 60 - 80 - 90 - 120...
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€5.74
5,74 € tax excl.
Sliding fitting for a drawer in black lacquered steel, with lower square fixing
Suitable for the partial extraction of wooden and metal drawers
€77.21
77,21 € tax excl.
Connector joint for applying the door system, suspended from the ceiling with support for Ø 25 mm tube.
Measures looks image.
€5.33
5,33 € tax excl.
Nylon wheel Ø 16 mm flat type
Specifications:
- Diameter 16 mm
- Thickness 5.5 mm
- Hole Ø 5 mm
€38.72
38,72 € tax excl.
Set 2 piece consisting of a pair of right+left sliding accessories for Legrabox drawers with metal sides.
Features:
Left and right guides
Motion technology with BLUMOTION / for TIP-ON BLUMOTION
Material Steel...
€7.38
7,38 € tax excl.
nylon wheel 30 mm round gola
specifications:
Diameter 30 mm
Thickness of 10 mm
Round throat diameter 6 mm - 3 mm approximately
Hole Ø 5
€6.15
6,15 € tax excl.
nylon wheel 19 mm round gola
specifications:
Diameter 19 mm
Thickness of 6 mm
Round throat diameter 2,4 mm - 1,4 mm approximately
Hole Ø 5
€35.25
35,25 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 230 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€18.03
18,03 € tax excl.
Backing support Ø 55 mm in stainless steel for SINCRO sliding door system to be installed with joints code IN.15.011 and IN.15.012.
Supplied accessories:
Screw M8X35 mm
Measures looks image.
Out-of-StockSold out
€63.20
63,20 € tax excl.
Sliding system Kit for wooden doors 18 mm distance with 2 patented soft air closing for doors up to 80kg. Aesthetically innovative, this system give a new concept of the external wall slidings, Thanks to the absence...
€7.38
7,38 € tax excl.
System ROLL-GE 20, Adjustable steel roller with M8 pin.
Wheels Ø 24 mm, material:
Steel (Art.85) or Delrin (Art.1285) to complete crown of spheres.
Carrying capacity: 45 kg (Art.85) - 35 kg (Art.1285)
€17.21
17,21 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
Out-of-StockSold out
€253.28
253,28 € tax excl.
Large galvanized guide 92x85 thickness 4 in 3 ml bars for industrial sliding and folding doors Rolling Center item GIPI4RZ
€86.70
86,70 € tax excl.
Blum LEGRABOX assembled drawer with dynamic load capacity of 100,000 opening and closing cycles.
Side height: M (90.5 mm)
External dimensions of the mobile unit: 30 - 40 - 45 - 60 - 80 - 90 - 120 cm (for internal...
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€5.00
5,00 € tax excl.
Bearing diameter 19 mm
Pad thickness 5.6 mm
Total thickness 24mm
Thickness without screw 18 mm
Screw thickness 6 mm
Screw pitch 5MA
Pin hole with 4MA pitch
Bearings particularly suitable for use...
€8.12
8,12 € tax excl.
Nylon wheel Ø 46.5 mm with round recess
Specifications:
- product dimensions: hole 8 mm(ID) diameter 46.5 mm(OD) thickness 10.5 mm(Thickness)
- U groove size : 5mm(Width)*5mm(Depth)*36.5mm(diameter)
- Material:...
€65.50
65,50 € tax excl.
Upper aluminum rail profile for sliding wardrobe doors up to 3 metres
Material: Anodized aluminum
Finish: Silver
€104.01
104,01 € tax excl.
Blum LEGRABOX assembled large drawer with dynamic load capacity of 100,000 opening and closing cycles.
Side height: C (177 mm) - F (241 mm)
External dimensions of the mobile unit: 30 - 40 - 45 - 60 - 80 - 90 - 120...
€4.92
4,92 € tax excl.
Sliding system kit with 35 mm round wheel adjustable in height and upper metal guide with stop.
The Kit includes:
an adjustable trolley with 35mm round wheel
a superior guide support
a plastic stopper...
€20.60
20,60 € tax excl.
End stop for sliding doors with floor fixing art. F 40 SZ Rolling Center
Measurements as per images.
€109.02
109,02 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€5.33
5,33 € tax excl.
Replacement lower trolley with adjustable ball bearings for 0105 Krona-Koblenz sliding door, with 30 mm nylon wheel and 35 mm hole on the door.
CHARACTERISTICS:
Function : Allows sliding doors for office or shop...
€72.50
72,50 € tax excl.
Blum LEGRABOX assembled large drawer with dynamic load capacity of 100,000 opening and closing cycles.
Side height: C (177 mm)
External dimensions of the mobile unit: 30 - 40 - 45 - 60 - 80 - 90 - 120 cm (for...
€6.15
6,15 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 28 mm
- Wheel Inner Diameter: 6 mm
- Wheel thickness: 7 mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€1,256.56
1.256,56 € tax excl.
System for SINCRO sliding doors in wood.
Features:
Door thickness 30-40 mm
Tubular track diameter Ø 25 mm (accessory sold separately)
The set includes:
4 wheels
4 stops
2 end pulleys for metal cable
2...
€55.13
55,13 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
Out-of-StockSold out
€258.20
258,20 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 2 overlapping doors with 4 air-cushioned stops and 4 snap-on guides for doors up to 80kg capacity.
Maximum door thickness 28 mm.
Customers who bought this product also bought:
€0.54
0,54 € tax excl.
Pre-assembly base for Clip Top Hinge
Cross pre-assembly plate with Euro screw Ø 6 mm.
Distance: 0mm/3mm
Material: Steel
Surface: Nickel-plated
Fixing: Euro screw, Distance between fixing positions: 32 mm -...
€51.56
51,56 € tax excl.
Grill for browning 8834 Gourmet BBQ System for Weber barbecues
The enamelled cast iron grill conducts heat evenly, creating the classic cooking streaks on the grill and sealing the juices and flavours inside the...
€154.51
154,51 € tax excl.
Rotisserie for Genesis II and Genesis II LX 200 and 300 Weber 7654
Turn your barbecue into a real rotisserie. Slowly roast a succulent whole chicken or tender ribs. The rotisserie gently rotates the food over the...
€38.52
38,52 € tax excl.
Handle handle GRA-30/A in Brass, available finishes Polished Chrome - Natural Polished Brass.
Window handle with pins, pull lever for window frames.
(on request with bushings)
Measurements as per images.
Out-of-StockSold out
€8.52
8,52 € tax excl.
Barbecue grill cleaner - 300 ml, 17875 is a spray spray that simplifies the cleaning of the grills and the internal components of the cooking compartment. Spray and leave for 30 seconds to dissolve grease and food...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español