€89.26
89,26 € tax excl.
Pinza torcifilo per torcere fili, per frenaggi di sicurezza, in acciaio al cromo-vanadio
Filter By
Filter By
Home
Filter By
€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€7.79
7,79 € tax excl.
Angle joint for bitz and bit holders with 1/4" hexagonal attachment for reversible drill driver.
€122.87
122,87 € tax excl.
Internal Ø 32 mm, 4 m with universal luminaire connection, clip system and universal adapter (445.029), antistatic. Draft regulation included for the reduction of the suction depression, if necessary.
€569.90
569,90 € tax excl.
Power consumption watt 1200 watts
Air flow max. 4500 lt./min
Max. Depression 25000 Pa
Filter surface 5000 cm²
Container volume 30 lt.
Liquid capacity 17 lt.
Power socket 100-2400 watts
Cable length 7.5 meters....
€15.57
15,57 € tax excl.
Einhell 6x25 ratchet strap with sheath
Technical data:
-2 straps 6m x 25mm
-Steel ratchet
-Soft sheath strap for protection against scratches
-TUV/GS certified (LC 250 / 500 daN) (kg)
-Polyester tape (PES)
€210.00
210,00 € tax excl.
For using sanding/polishing sleeves. These are simply pushed over the rubber holder and held securely in place by centrifugal force.
External diameter Ø 100 mm
Internal connection diameter Ø 19 mm
€24.51
24,51 € tax excl.
Fixed net for loading and transporting loose items 2.7 x 2.0 m mesh 45mm - wire Ø 3mm
Edge Ø 6mm - Rubberized
€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115
VE electronic control: with infinitely adjustable speed control.
Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
€663.93
663,93 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander + Antistatic suction hose
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Antistatic suction...
€179.51
179,51 € tax excl.
Smerigliatrice angolare 1400 watt con eccezionale capacità di asportazione, 125 mm
€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
€24.18
24,18 € tax excl.
Folding shaft length 950 mm with self-tightening chuck for drill bit from 0.5 to 6 mm, bending arc greater than 150 mm. Maximum 3000 UPM (Revolutions Per Minute) for precision work in wood, plastic, iron and...
€564.75
564,75 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Measures looks image.
€1,094.00
1.094,00 € tax excl.
Giraffe for wall and ceiling. Equipped with an innovative system with interchangeable heads. The heads attach and detach with a simple click. Segmented sanding head with swiveling segment. This allows the machining of...
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€369.00
369,00 € tax excl.
Body only Handy-Giraffe sander.
Ideal for use on small surfaces and confined spaces, sanding plasterboard panels, panels in thermal insulating polystyrene and for preparation for painting. Equipped with an innovative...
€105.00
105,00 € tax excl.
The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
This pocket sized pH tester is used to monitor pH in laboratories...
€154.92
154,92 € tax excl.
HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€4.10
4,10 € tax excl.
Ready-to-use product with Active Chlorine 3% removes Germs and Bacteria from all surfaces, Sanitizing Spray for Surfaces, Detergent and Dilutable Detergent Soap For cleaning floors in the home and professional...
-50%
€9.02
€18.03
9,02 € tax excl.
Knife and corkscrew set with modern look in black, 2 pieces 0143/30
€9.02
9,02 € tax excl.
CV Steel, for removing screws, threaded bolts and broken pipe ends.
Kit consisting of 5 pieces:
No. 1: 3 - 6 mm
No. 2: 6 - 8 mm
No. 3: 8 - 11 mm
No. 4: 11 - 14 mm
no. 5: 14 - 18 mm.
€8.20
8,20 € tax excl.
Adjustment and closure on different sizes with a single tightening,
the two jaws move parallel to each other,
the closing system tightens in any position,
laminated steel structure.
€974.59
974,59 € tax excl.
Cesoia elettrica per tagli senza deformazione della lamiera
€12.30
12,30 € tax excl.
Set of 3 tapes 60/80/120 BT-US 400 Einhell
Technical Data:
- Abrasive belt
- 1 piece grain 60 - 1 piece grain 80 - 1 piece 120 grit - Weight 380 grams
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€9.02
9,02 € tax excl.
Set of 5 tapes 2x 60/80, 1x100 BT-US 240 Einhell
Technical Data:
- Abrasive belt
- 2 pieces of 60 grit - 2 pieces of 80 grit - 1 piece of 100 grit - Weight 500 grams
€1,099.00
1.099,00 € tax excl.
Set consisting of:
Giraffe wall and ceiling sander GE 7
Handy-Giraffe GCE 6-EC
Rotary sanding head with edge segment MH-R D225
Clip-on quick clamping ring red SH-FC 32
Antistatic suction hose with auxiliary air...
-50%
€6.15
€12.30
6,15 € tax excl.
Knives set in natural dark wooden box, 2 pieces.
Useful outdoor activity companion consisting of:
- 1 Knife 9x2 cm, large spare blade, blade length 5.5 cm, scissors, hacksaw, bone saw, can opener, corkscrew,...
-50%
€6.15
€12.30
6,15 € tax excl.
Knife set in dark blue lacquered plastic box, 3 pieces
Useful outdoor activity companion consisting of:
- 1 Knife 9x2 cm, large spare blade, blade length 5.5 cm, scissors, hacksaw, bone saw, can opener,...
-50%
€8.98
€17.95
8,98 € tax excl.
Sophisticated looking red wood knife set, 2 pieces
€63.11
63,11 € tax excl.
Hanna Checktemp 1 (HI-98509) is a compact food probe with a stainless steel sensor on a 1m flexible cable. Highly accurate it is designed to take fast response temperature measurements in semi-solids and liquids. The...
€278.69
278,69 € tax excl.
Technical attributes
-Power absorbed 400 watts
-Number of idle revolutions 6000 - 10000 / min.
-Number of empty strokes 12000 - 20000 / min.
-5 mm stroke
- Pad Ø 150 mm
-Removable abrasive fixing
- External...
€200.82
200,82 € tax excl.
The HALO2 Wireless pH Tester is designed to bring simplicity and sophistication to pH testing in a variety of settings and environments.
HI9810322 was developed for the analysis of cheese and semi-solid foods....
Out-of-StockSold out
€76.23
76,23 € tax excl.
The GC-CS 235 E chain sharpener allows you to obtain a precise sharpening result with all common types of saw chain.
Features:
Depth limitation that guarantees sharpening that is not too invasive
Graduated scale...
Out-of-StockSold out
Out-of-StockSold out
€171.31
171,31 € tax excl.
Smerigliatrice angolare 1400 watt con testata extra-piana, 125 mm
Out-of-StockSold out
Out-of-StockSold out
Out-of-StockSold out
€515.57
515,57 € tax excl.
Smerigliatrice rettilinea a dito, con preselezione continua del numero delle corse mediante rotella di regolazione
Out-of-StockSold out
€483.61
483,61 € tax excl.
Aspiratore di sicurezza con funzione pulizia filtro automatica, 43 l, classe L
Out-of-StockSold out
€635.00
635,00 € tax excl.
Levigatrice giraffa indicata per la levigatura di pannelli in cartongesso e termoisolanti e per la preparazione ai lavori di verniciatura e lucidatura.
Out-of-StockSold out
€803.28
803,28 € tax excl.
WST 700 VV Plus Vario-Giraffe wall and ceiling sander
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Vario-Giraffe adapts to your needs....
Out-of-StockSold out
€245.90
245,90 € tax excl.
The FC2022 HALO is a pH and temperature electrode which incorporates a Bluetooth transmitter to wirelessly connect to an iPad or the Hanna Edge-Blu pH tablet meter.
No need for a pH meter
Free to use Hanna Lap App...
Out-of-StockSold out
€14.70
14,70 € tax excl.
Steel screw Drill out , self-centering tip a left cut, Forte hooking on the broken screw, secure extraction without drawbacks.
Out-of-StockSold out
Out-of-StockSold out
€783.93
783,93 € tax excl.
Protool saw raiper UniverS 1600W SSP200EB, 1600W, cable length 7.5 m, cutting depth 200 mm
Out-of-StockSold out
€1,499.00
1.499,00 € tax excl.
Characteristics:
Power 1400W
Brush Ø 125 mm
Brush width 100 mm
No load speed 1000 - 3500 rpm
Tool holder 19 mm
4.0 m cable
Dimensions LxWxH 320x210x195 mm
Supplied accessories:
BR 125 sanding attachment...
Out-of-StockSold out
€491.80
491,80 € tax excl.
Technical attributes
-Power absorbed 1400 watts
- Power output 880 watts
-Max. Tool Ø 125 mm
-Tool width 100 mm
-Tool attachment 19 mm
-Number of idle revolutions 1000-3500 / min.
-Cable length 4.0 mt....
Showing 1-68 of 68 item(s)
Italiano
Français
Deutsch
Español