Click for more products.
No produts were found.
Filter By
Filter By
Color or Finish
Length
Measure
Packaging
Weight
  • 0 kg - 20 kg

Brand
Brand

Home

€36.00
36,00 € tax excl.
Set 3 pieces transparent shoe tray-object holder Servetto VASCHETTA. In unbreakable glossy transparent polycarbonate. It can also be used in combination with: aluminum profile and with the shoe racks model Tac and...
€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques. Dimensions: Diameter Ø 38 mm Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small: Length 28.5 cm Large: Length 34 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small with 2 Pockets: Length 32 cm - Width 20 cm Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques. Dimensions: Length 33 cm Width 6 cm
€13.85
13,85 € tax excl.
Bell, the accessory that allows you to lengthen the Servetto 2004 handle by 22 cm. It is easy to install and is made of transparent polycarbonate
€5.33
5,33 € tax excl.
BINDAN-P B3/D3 is supplied in sizes: 100 gr blister and basic, 250 gr, 500 gr, 570 gr, 800 gr, 1 Kg, 2,5 Kg, 5 kg, 10 kg, 25 Kg, 150Kg. Without fillers, resistant to water and mold. No solvents or formaldehyde,...
€5.57
5,57 € tax excl.
 BINDAN-RS B2/D2 is supplied in sizes: 100 gr blister and basic, 250 gr, 500 gr, 600 gr, 800 gr, 1 Kg, 2,5 Kg, 5 kg, 10 kg, 25 Kg, 150Kg. Bindan RS is a rapid glue B2, pure, devoid of fillers. Resistant to moisture...
€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
€15.57
15,57 € tax excl.
Einhell 6x25 ratchet strap with sheath Technical data: -2 straps 6m x 25mm -Steel ratchet -Soft sheath strap for protection against scratches -TUV/GS certified (LC 250 / 500 daN) (kg) -Polyester tape (PES)
€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...
€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115 VE electronic control: with infinitely adjustable speed control. Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
€24.18
24,18 € tax excl.
Folding shaft length 950 mm with self-tightening chuck for drill bit from 0.5 to 6 mm, bending arc greater than 150 mm. Maximum 3000 UPM (Revolutions Per Minute) for precision work in wood, plastic, iron and...
€564.75
564,75 € tax excl.
GE 5 + SH  Kit Giraffe wall and ceiling sander  VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel Measures looks image.
€13.00
13,00 € tax excl.
Guitar pasta cuts obtained by cutting the best beeches, handcrafted in Abruzzo according to high-quality techniques. Dimensions: Length 47 cm (including screws) Width 23 cm Height 7,5 cm Features: It's a...
€17.13
17,13 € tax excl.
Ham holder made by cutting the finest beechwood, handcrafted in Abruzzo using high-quality techniques. Dimensions: Base: Length 40 cm - Width 19 cm - Height 2.5 cm Handle: Length 64 cm - Width (with handle...
€5.90
5,90 € tax excl.
Box made of faesite, handcrafted in Abruzzo using high-quality techniques. Available in: Small: Length 17.5 cm - Width 11 cm - Height 6 cm Medium: Length 29 cm - Width 17 cm - Height 7.5 cm Large: Length 33 cm -...
€5.57
5,57 € tax excl.
Tray made by cutting the finest beech trees, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small 30x17 cm Large 35x17 cm
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement. This pocket sized pH tester is used to monitor pH in laboratories...
€8.20
8,20 € tax excl.
Lockable handle length 28 mm in zinc alloy suitable for the insertion of 30 and 40 mm hook padlocks (5-7 mm shackle diameter). Thanks to the various lengths of the lockable cylinder, it is possible to apply it on both...
€7.21
7,21 € tax excl.
Miniature guitar made of beech wood, ideal for children's entertainment or as a decorative item for your home. Includes a mini rolling pin made of beech wood, 8 cm. Dimensions: Length 10 cm Width 15.5 cm Height...
€8.03
8,03 € tax excl.
Spanner lock with flap single horizontal and control 30 mm DK for drawer unit, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, control 30 mm DK and nickel finishing ferrule. Measures looks image.
€4.92
4,92 € tax excl.
Universal spanner lock square head with flat lever 30 mm KD, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, lever Q7 int. 40 and nut. Key rotation 90 ° - 1 extraction Measures looks image.
€8.20
8,20 € tax excl.
The 1/4 turn triangular impression lock  with adjustable cam is composed of a zinc alloy body inside which there is a spring-loaded rotor that, moved by a key, rotates determining the opening or closing. A 74 mm iron...
Showing 1-90 of 177 item(s)

Settings

Menu

Create a free account to use wishlists.

Sign in