Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Color or Finish
Cut
Metric step
Diameter
Length
Measure
Length
Packaging
Weight

  • 0.001 kg - 20 kg

Brand
Brand

Home

Filter By
Brand: CMT Orange Tools Brand: FA.CO.PLAST. srl Brand: Festool Brand: FLEX Brand: IBFM Brand: Tecfi Brand: U-Power Clear all
Aluminum combination deadbolts IBFM 56 Aluminum combination deadbolts IBFM 56

Aluminum combination deadbolts IBFM 56

€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
Angle grinder 1200W, Ø 125 mm Flex L 12-11 125 Angle grinder 1200W, Ø 125 mm Flex L 12-11 125

Angle grinder 1200W, Ø 125 mm Flex L 12-11 125

€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
Angle grinder 1700W, Ø 125 mm Flex LBE 17-11 125 Angle grinder 1700W, Ø 125 mm Flex LBE 17-11 125

Angle grinder 1700W, Ø 125 mm Flex LBE 17-11 125

€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
IBFM 475 spring staples against dust for locks IBFM 475 spring staples against dust for locks

Built-in floor well with dust cap and spring

€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...
CMT Tools DAF-001 Digital angle finger CMT Tools DAF-001 Digital angle finger

CMT Tools DAF-001 Digital angle finger

€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Cremone handle with key for window IBFM 565/ZA Cremone handle with key for window IBFM 565/ZA

Cremone handle with key for window IBFM 565/ZA

€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.
Denim stretch jeans U-Power Trafic Denim stretch jeans U-Power Trafic

Denim stretch jeans U-Power Trafic

€29.51
29,51 € tax excl.
2 large gusseted front pockets, coin pocket, side pocket for tools, multi-functional side pocket with mobile phone holder and detacheable badge holder, 2 back pockets, one with zip, hammer loop. Stretch insert at hip...
IBMF double acting spring hinges "Bommer" type IBMF double acting spring hinges "Bommer" type

Double action Bommer type spring hinge

€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...
Extension table VB, 492090 for table saw Festool Extension table VB, 492090 for table saw Festool

Extension table VB, 492090 for table saw Festool

€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right. The...
Extension table VL, 492092 for table saw Festool Extension table VL, 492092 for table saw Festool

Extension table VL, 492092 for table saw Festool

€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
Flex SFE 8-2 115 flat-head sander 800 watt Flex SFE 8-2 115 flat-head sander 800 watt

Flat-head sander 800 watt Flex SFE 8-2 115

€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115 VE electronic control: with infinitely adjustable speed control. Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
Flex WD10 10 lt tank Flex WD10 10 lt tank

Flex WD10 10 lt tank

€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
Giraffe wall and ceiling sander 500 watt Flex GE 5 Giraffe wall and ceiling sander 500 watt Flex GE 5

Giraffe wall and ceiling sander 500 watt Flex GE 5

€564.75
564,75 € tax excl.
GE 5 + SH  Kit Giraffe wall and ceiling sander  VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel Measures looks image.
IBFM Window opening stop wasistas IBFM Window opening stop wasistas

Guide arm with stop for bottom hinged windows 347

€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only) sliding slot 14 cm base attacks 2.5x2.5 and 3.3x2.5 cm IBMF article 347 FINISHES: Tropicalized steel Bronzed Steel
Guide bearing for 12,7x5x4,76 mm CMT cutter Guide bearing for 12,7x5x4,76 mm CMT cutter

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm
Guide bearing for 16x5x5mm CMT cutter Guide bearing for 16x5x5mm CMT cutter

Guide bearing for 16x5x5mm CMT cutter

€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm
Guide bearing for 19x7x6,35 mm CMT cutter Guide bearing for 19x7x6,35 mm CMT cutter

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm
Guide bearing for 22x7x8 mm CMT cutter Guide bearing for 22x7x8 mm CMT cutter

Guide bearing for 22x7x8 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm
Guide bearing for 9,5x3,2x4,76 mm CMT cutter Guide bearing for 9,5x3,2x4,76 mm CMT cutter

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm
Metal lock for mailboxes IBFM filing cabinet 142 Metal lock for mailboxes IBFM filing cabinet 142

Metal lock for mailboxes IBFM filing cabinet 142

€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
Mina graphite 6 pcs for PCL-3 CMT Tools Mina graphite 6 pcs for PCL-3 CMT Tools

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
Mina graphite and pastel 6 pcs for PCL-3 CMT Tools Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red   IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
IBMF 102 single actin spring hinge "Bommer" type IBMF 102 single actin spring hinge "Bommer" type

Pair of single action Bommer type spring hinges

€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...
Screw countersunk flat head with cross recess stainless steel Screw countersunk flat head with cross recess stainless steel

Screw countersunk flat head with cross recess stainless steel

€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
Screw Flat Head Countersunk Cross footprint bronzed for wood Screw Flat Head Countersunk Cross footprint bronzed for wood
-30%

Screw Flat Head Countersunk Cross footprint bronzed for wood

€5.01 €7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood white galvanized cross countersunk flat head Screw for wood white galvanized cross countersunk flat head
-30%

Screw for wood white galvanized cross countersunk flat head

€4.31 €6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood Yellow galvanized cross countersunk flat head Screw for wood Yellow galvanized cross countersunk flat head
-30%

Screw for wood Yellow galvanized cross countersunk flat head

€4.17 €5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Set 25 abrasive discs Mix 496124, Ø 225 mm Festool Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

€33.00
33,00 € tax excl.
Mix of 25 abrasive discs Ø 225 mm. Brilliant2 for roughing, intermediate sanding, and finishing of furniture: 5 pieces P150 BR2 5 pieces P180 BR2 5 pieces P240 BR2 Cristal for coarse and rapid pre-sanding of...
Load More Products
Showing 1-90 of 153 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in