Click for more products.
No produts were found.
Filter By
Filter By
Color or Finish
Misure H x L (mm)
Metric step
Diameter
Length
Packaging
Wheelbase
Weight
  • 0 kg - 20 kg

Brand
Brand

Home

€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€19.67
19,67 € tax excl.
Aluminum handle with compass for window and frames. Powder coating. Available colors: Silver anodized (F1) Champagne anodized (F2) Gold anodized (F3) Anodized bronze (F4) Polished Brass (GCTOL)...
€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115 VE electronic control: with infinitely adjustable speed control. Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
€16.44
16,44 € tax excl.
Milena 45x9 mm free/busy latch for bathroom WC doors 6x6 square Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass Measurements as per pictures.
€22.95
22,95 € tax excl.
Door handle with plate Available finishes: Polished painted brass - Satin chromed brass - Scratched bronze painted brass - Polished chromed brass Available wheelbases: 7 cm - 8.5 cm (Yale hole) - 9 cm
€9.84
9,84 € tax excl.
Brass hammer for window and door frames with 7 mm square mechanism Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€564.75
564,75 € tax excl.
GE 5 + SH  Kit Giraffe wall and ceiling sander  VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel Measures looks image.
€23.77
23,77 € tax excl.
Handle kit for YALE 60 overhead door. Available colors: Silver anodized (F1) Anodized bronze (F4) Polished Brass (GCTOL) Satin Brass (GCTOS) Polished Chrome (GCTCL) Satin Chrome (GCTCS)...
€28.32
28,32 € tax excl.
SCROSS 1B round kit for sliding door with Ghidini lock Suitable for panel thickness 44mm, ±1mm Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black Measurements as...
€3.84
3,84 € tax excl.
Ghidini round sliding door drag handle Available finishes: Burnished brass - Polished chrome brass - Satin chrome brass - Polished painted brass Measurements as per pictures.
€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
Screw Flat Head Countersunk Cross footprint bronzed for wood Screw Flat Head Countersunk Cross footprint bronzed for wood
-30%
€5.01 €7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood white galvanized cross countersunk flat head Screw for wood white galvanized cross countersunk flat head
-30%
€4.31 €6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the...
Screw for wood Yellow galvanized cross countersunk flat head Screw for wood Yellow galvanized cross countersunk flat head
-30%
€4.17 €5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€110.00
110,00 € tax excl.
Harness with 1 dorsal anchor point and extension strap + 1 sternal anchor point + 180° rotating positioning belt with 2 side rings and tool holder rings. Adjustable on shoulders and thighs. Chest strap, elastic straps...
€1,099.00
1.099,00 € tax excl.
Set consisting of: Giraffe wall and ceiling sander GE 7 Handy-Giraffe GCE 6-EC Rotary sanding head with edge segment MH-R D225 Clip-on quick clamping ring red SH-FC 32 Antistatic suction hose with auxiliary air...
€0.11
0,11 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, brass-plated and waxed. The special PATENTED thread allows for faster, more practical and safer tightening even in the hardest laminated...
€0.11
0,11 € tax excl.
Screw flat head countersunk footprint Cross type Z, for chipboard, hardened steel, Bronze plated and waxed. The special PATENTED thread allows a faster, practical and safe clamping even in the toughest laminated woods.
Big punch ladle for drain Big punch ladle for drain
Out-of-StockSold out
€20.80
20,80 € tax excl.
Big punch ladle for drain, mounting with handle Ø 26 mm
Big punch ladle for gutter Big punch ladle for gutter
Out-of-StockSold out
€18.65
18,65 € tax excl.
Big punch ladle for gutter, mounting with handle Ø 26 mm
Big punch ladle for gutter Big punch ladle for gutter
Out-of-StockSold out
€22.35
22,35 € tax excl.
Big punch ladle for gutter, mounting with handle Ø 37 mm
Flex L1503 sander Flex L1503 sander
Out-of-StockSold out
€324.59
324,59 € tax excl.
Lucidatrice classica con calotta di presa
Flex ST110 electric straight grinder Flex ST110 electric straight grinder
Out-of-StockSold out
€515.57
515,57 € tax excl.
Smerigliatrice rettilinea a dito, con preselezione continua del numero delle corse mediante rotella di regolazione
Flex VCE45 apirator Flex VCE45 apirator
Out-of-StockSold out
€483.61
483,61 € tax excl.
Aspiratore di sicurezza con funzione pulizia filtro automatica, 43 l, classe L
Flex WSE500 giraffe sander Flex WSE500 giraffe sander
Out-of-StockSold out
€635.00
635,00 € tax excl.
Levigatrice giraffa indicata per la levigatura di pannelli in cartongesso e termoisolanti e per la preparazione ai lavori di verniciatura e lucidatura.
Ghidini Handle Garage doors Kit YALE 70 Ghidini Handle Garage doors Kit YALE 70
Out-of-StockSold out
€20.64
20,64 € tax excl.
Handle garage doors Kit YALE 70. Available colors:  Aluminium silver (F1) Aluminium bronze (F4) Polished brass (GCTOL) Satin brass (GCTOS) Polished chrome (GCTCL) Satin chrome (GCTCS) Measures looks image.
Ghidini window handels Roof Ghidini window handels Roof
Out-of-StockSold out
€7.38
7,38 € tax excl.
Handle for windows and attic frames with overlapping external closure, suitable for replacing old wooden skylights and dormers. Closing lever height 20 mm Dimensions and measurements present in the images....
Multiuso solleva tombini universale Multiuso solleva tombini universale
Out-of-StockSold out
€15.41
15,41 € tax excl.
The hook is a multipurpose tool that contains all the functions useful for maintenance of joints or manholes generic. The central hook of this tool allows you to raise or anchor any manhole lifting it easily; It is...
Punch ladle for manhole Punch ladle for manhole
Out-of-StockSold out
€17.45
17,45 € tax excl.
Punch ladle for manhole, mounting with handle Ø 26 MM
TRINOXFLEX BSE 14-3 100 satin finishing machine 433.411 TRINOXFLEX BSE 14-3 100 satin finishing machine 433.411
Out-of-StockSold out
€491.80
491,80 € tax excl.
Technical attributes -Power absorbed 1400 watts - Power output 880 watts -Max. Tool Ø 125 mm -Tool width 100 mm -Tool attachment 19 mm -Number of idle revolutions 1000-3500 / min. -Cable length 4.0 mt....
Showing 1-82 of 82 item(s)

Settings

Menu

Create a free account to use wishlists.

Sign in