€16.31
16,31 € tax excl.
Makita centering tip for diamond core bit suitable for DBM130 - DBM080 - 8406 to be used with adapter 053161
Diamond rim dry use M18x1,5 Makita
Reference:
A-80488
Diamond rim M18 x 1.5 dry use for Mod. 8406, DBM130.
For use with single rotation.
Applications: concrete, granite, stone
€186.30
186,30 € tax excl.
Calculate Shipping Cost
Add to wishlist
You may also like
€39.83
39,83 € tax excl.
Makita diamond core extension M18 x 2.5 suitable for DBM130 - DBM080
to be used with adapter 053161
€23.77
23,77 € tax excl.
Makita diamond ring adapter M18 x 1.5 to M18 x 2.5 suitable for DBM130
€155.52
155,52 € tax excl.
Ideal for drilling holes with a maximum depth of 420 mm on concrete and other building materials. Used with Makita diamond core drill DBM230 model. Thread 1+1/4 ". Material Bi metal.
Diameter: from Ø 32 mm to Ø 225 mm
€2,450.82
2.450,82 € tax excl.
Core drill with slow starting, for execution of wet holes with a large diameter and depth of masonry, cement and stone
Features:
Use the core drill only with the proper support code. P-54190Mechanical clutchThermal...
€557.38
557,38 € tax excl.
Dry core drill ideal for holes Ø 132 mm
Features:
Electronic switchConstant speed under loadSoft starter and electronic protection against overload2 mechanical speedsSafety clutch
Technical data:
Power consumption...
other products in the same category:
€4.09
4,09 € tax excl.
Features:
Beech material
Surface with multilayer finish
UV coating
No visible rivets
Abrasion resistant
Milled ends
Fixing of the brass rods
Accuracy class III
Weight 132 g
€7.38
7,38 € tax excl.
Knife sharpening with a special steel and pottery for a perfect sharpening on all kinds of scissors and knives.
€2.70
2,70 € tax excl.
Black 6.2mm wide tip permanent marker.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Can be used on wet, oily, rusty and debris surfaces.
For use on concrete, wood, metal, plywood, OSB and plastic.
€7.38
7,38 € tax excl.
45° and 90° magnetic assembly positioner-square, ideal for welding, assembling, installing pipes, marking, dragging and lifting.
Thickness 15 mm
Dimensions 111x111 mm
Maximum weight supported 23 Kg
€11.39
11,39 € tax excl.
The narrow Klemmy Bessey, in evaporated beech wood, has the upper arm, the lower arm and the eccentric lever hard wood of high quality and the bearing surfaces of pressed cork for gentle tightening.The vertical...
€22.55
22,55 € tax excl.
175 mm blade in burnished and painted steel. Leather handle.
€81.15
81,15 € tax excl.
With 4 compartments, in Nylon 600 Den, large compartment for easy access, specific for long tools, organizers, electric tools, etc. Multiple pockets and accessories for many tools, a padded PC compartment and a...
€114.75
114,75 € tax excl.
Features:
LCD screen. Measurement angle: from 0 ° to 225 °
Antichoc bubbles: 1 horizontal and 1 vertical
Anodised aluminum profile
Angle measurement accuracy: +/- 0.1 °
Arm length: 43 cm
Functions:...
€4.51
4,51 € tax excl.
Chrome vanadium steel body - Black oxide finish - Plastic holder.
Sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mm
Length 45 - 65 mm
€13.85
13,85 € tax excl.
Chrome vanadium steel body - Satin finish - Inversion by lever - Quick release mechanism of the compass - Soft bi-material handle.
- 3/8" MALE square connection
- total length 210mm
- number of teeth 45
- Ø head...
€44.26
44,26 € tax excl.
Features:
Folding legs enable the quick setup and breakdown of the sawhorse onsite
Solid stable structure enables the support of up to 340kg (per pair)
Metal bar enables easy clamping
Can be clipped together and...
€24.59
24,59 € tax excl.
Epoxy powder coated metal cases red MM000 for bits and pieces. Various sizes plastic elements inside. Button closing.
Blue color on request.
4 available sizes:
Small 320x220x70 mm (MM00001)
Medium 370x270x70 mm...
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€3.55
3,55 € tax excl.
Valex cartridge sealant and grease gun in aluminum, friction feed, ergonomic handle
Out-of-StockSold out
€86.07
86,07 € tax excl.
Pneumatic sandblasting gun for professional sandblasting and tempered steel nozzle PS Walmec sandblasting gun with nozzle, for dry decapage work and difficult and delicate decapage on all supports: metal, wood, etc......
€49.10
49,10 € tax excl.
Ideal for interior fittings and suitable for all carpentry work and in particular the construction of furniture
Shoot pins with head from 12 to 50 mm, pins without head from 14 to 50 mm
- Working pressure 6.2bar...
€15.98
15,98 € tax excl.
Chrome vanadium steel blade - Burnished magnetic tip - Soft bi-material handle with inches rest for a safer grip.
3 slotted insulated screwdrivers straight blade: 3x0,5mm-4x0,8mm-5,5x1mm
3 Phillips insulated...
€13.03
13,03 € tax excl.
Compressed air gun for pipe cleaners, sink cleaners, drain cleaners, etcWith 4 rubber adapters for shower-bidet-Wc-sink- diameter 20cm- diameter 11.3cm- diameter 6.3cm- diameter 5.2cm
€1.84
1,84 € tax excl.
Solvent-based permanent marker. Universal, can be used on any surface. Medium bullet tip. The fibers of the tip, which determines the quality, do not fray over time, keeping the line and writing softness unaltered and...
€33.22
33,22 € tax excl.
For processing Poly Max and other types of sausage glue up to 600ml. Can also be used, with a small modification, for working with glue in cartridges.CHARACTERISTICS: Durable system Direct stop function...
€18.77
18,77 € tax excl.
Valex drill vice for column drills
Measurements
Jaws 75 mm - Opening 60 mm
Jaws 100 mm - Opening 90 mm
Jaws 125 mm - Opening 100 mm
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€115.57
115,57 € tax excl.
Set of pliers including PRH56A and PRH57A with safety rings and replaceable tips
For PRH56A bits:
6 mm (copper)
9 mm (black)
1.2 mm (silver)
For PRH57A bits:
9 mm (black)
1.2 mm (silver)
1.8 mm (copper)
€61.50
61,50 € tax excl.
Forged steel head - Soft non-slip handle.
Head weight 5 Kg
Head dimensions (wxhxd): 159x68x70 mm
Total length 910 mm
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€6.19
6,19 € tax excl.
Heavy double socket wrench, hexagonal ports, transverse holes, chrome vanadium steel body, polished finish.
Key size: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 20x22 mm
Key length: from 105 to 170 mm...
€29.90
29,90 € tax excl.
Ergonomic soft grip
Lockable handle for minimum bulk Specifications:
Code 23468100
Material ABS plastic with glass fibers
Dimensions 60 x 180 x 160
VR22 ring stitches
Ring stitch diameter 5-11 mm
Usage for...
€81.97
81,97 € tax excl.
Features:
The worktop provides full clamping coverage, enabling clamps to be used in all positions and for all applications
Features a space saving, folding worktop for compact storage on site, or in any garage or...
€12.50
12,50 € tax excl.
Ratchet tightening - Quick release button - Steel and plastic structure - Soft grip - Can be used as a spreader.
Depth 60 mm with three opening sizes: 150 - 300 - 450 mm
€4.51
4,51 € tax excl.
Tempered steel blade - Two-component handle. Dimensions 200x110 mm.
€155.52
155,52 € tax excl.
Ideal for drilling holes with a maximum depth of 420 mm on concrete and other building materials. Used with Makita diamond core drill DBM230 model. Thread 1+1/4 ". Material Bi metal.
Diameter: from Ø 32 mm to Ø 225 mm
€3.85
3,85 € tax excl.
Pozidriv Screwdriver with 4 integrated slots with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español