€176.23
176,23 € tax excl.
Mak-connect SDS-MAX Connection, Diameter 30 mm, Total Length 190 mm.
Makita Shank Extension P-56889 for Mak-connect SDS-MAX drill connection
Reference:
P-56889
Shank Extension P-56889 for Mak-connect SDS-MAX Connection, hexagonal connection 13 mm, Total Length 320 mm.
€29.43
29,43 € tax excl.
Calculate Shipping Cost
Add to wishlist
You may also like
other products in the same category:
€1.23
1,23 € tax excl.
Top quality ultra-thin cutting disc, applications on mild steel, sheet metal, tubes and aluminum profiles.
Diameter: 115 mm
Hole: 22.23mm
Blade thickness: 1.6 mm
Out-of-StockSold out
€8.69
8,69 € tax excl.
Pad rubber sole 85x160 mm for orbital sander.
150067-9 Makita, for models BO4560
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€49.18
49,18 € tax excl.
Concave blade for precision cuts on leather and marquetry. Ideal for all models except 10-550 Titan Fixed blade Knife and 10-199 199E Fixed Blade Knife. Ideal where accuracy is paramount.
Dimensions:
Width 0,7 mm...
€37.62
37,62 € tax excl.
- Length 260 mm, height 270 mm, width 145 mm, capacity 180 mm
- Stainless steel measuring tape holder clip
- Suitable for left and right handed
- Conveniently holds tools in one place
- 4 genuine leather tool...
€12.30
12,30 € tax excl.
Makita spare part for BO4565 models
€78.69
78,69 € tax excl.
FEATURES:
Upper tool compartment
Steel Closures
Number of drawers: 3 with Security door
Number of compartments: 32 DA16
Possibility of Padlock
Polypropylene material
Measures cm H33x44x25
€44.30
44,30 € tax excl.
Replacement complete base support for Makita 3708 and 3708FC (3707,3707F,3707FC) trimmers
€18.03
18,03 € tax excl.
Saw chain length 115 mm, chain step 1/4 inch, groove 1.3 mm, 42 traction meshes.
P-19928 Makita.
€135.25
135,25 € tax excl.
Polypropylene case realized with the injection molding technique. It has a modern design, with compact dimensions, high capacity and lightweight. The aluminium profile grants a further strength.
A B...
€40.90
40,90 € tax excl.
Wood blade for miter saw and circular saw 190 x 30 x 60z thickness 1.4/2.2 original Makita
MAKFORCE CSXF19060G series
Suitable for all rotary saws.
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€13.00
13,00 € tax excl.
2 pieces of synthetic cloth cap for polisher and grinder measuring 180 mm, hook and loop fastening
€37.40
37,40 € tax excl.
Super Soft rubber backing pad Ø 150 mm for random orbit sander.
197316-3 Makita, for tools BO6050
Disk : 150 mm
€24.59
24,59 € tax excl.
Parallel stop guide 122707-9 for mitre saw. For making precise, straight cuts.
Suitable for LH1040F model.
€10.25
10,25 € tax excl.
In blued steel, one-piece body - Excellent for drilling wood, plastic, plasterboard.
6 cups Ø 51 - 57 - 67 - 76 - 89 - 102 mm with a total height of 22 mm
Adapter with centering bit and round shank
Hex key
€30.12
30,12 € tax excl.
Packing 1000 pcs (20 bands of 50 screws) taped screw PH2 footprint for wood-to-wood joints and panels.
Yellow galvanized taped screws with double thread for DFR550 - BFR550 self-powered screwdriver.
Tip Ø: 4.2 mm...
€68.85
68,85 € tax excl.
Diamond blade Ø 125 mm for dry use with double row, bore diameter (shaft diameter) Ø 22.23 mm, segment height 5.5 mm, no-load speed 12,200 min⁻¹.
Suitable for roughing concrete, cement, and bricks with a wall...
€152.46
152,46 € tax excl.
Features:
Suitable for sawing all materials
Unbreakable and flexible back
In hanging case Super fast bi-metal cobalt steel blade
Length 300 mm, teeth per inch 34
Pack of 100 pieces
€3.28
3,28 € tax excl.
B-15 HCS blade for wood and plastic for jigsaws with European connection.
Applications: wood in general, panels, PVC and plexiglass layered materials.
Total length: 75 mm
Working length: 50 mm
Teeth per inch: 12...
€311.48
311,48 € tax excl.
Indestructible tool case made entirely of HDPE resin, a shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case with reinforced corners, ideal for air travelling...
€81.15
81,15 € tax excl.
With 4 compartments, in Nylon 600 Den, large compartment for easy access, specific for long tools, organizers, electric tools, etc. Multiple pockets and accessories for many tools, a padded PC compartment and a...
€36.80
36,80 € tax excl.
Replacement saw blade chain, Chain bar length 18"/45 cm, Number of chain teeth 72, Chain pitch 325", 1.5 mm chain.
It requires little maintenance and stays sharp so you can get the job done quickly and easily....
€104.60
104,60 € tax excl.
Features:
Part of the PACKOUT modular storage system
Constructed with impact resistant polymers for jobsite durability
IP65 rated weather seal to keep out rain and jobsite debris
Metal reinforced corners
Metal...
€87.30
87,30 € tax excl.
Suction hood 196845-3 for angle grinder Ø 115-125 mm Makita
Robust construction for use on professional construction sites
Lightweight aluminum housing thanks to the plastic window
allows maximum sharing and...
€0.82
0,82 € tax excl.
Top quality ultra-thin cutting disc, applications on mild steel, stainless steel, sheet metal, tubes.Diameter: 115 mmHole: 22.23 mmBlade thickness: 1 mm
€67.21
67,21 € tax excl.
180 ° swivel rod - Painted steel structure.
Capacity kg / cm: 300/110 - 600/75
Net weight: 8.5 kg
€12.30
12,30 € tax excl.
Set of 3 tapes 60/80/120 BT-US 400 Einhell
Technical Data:
- Abrasive belt
- 1 piece grain 60 - 1 piece grain 80 - 1 piece 120 grit - Weight 380 grams
€57.38
57,38 € tax excl.
° Rigid and waterproof plastic bottom. ° Durable steel handle. ° Ergonomic foam handle. ° Open design for quick tool position. ° Riveted in critical points. ° With shoulder strap ° 49 x 31 x 35.5 cm; 1 Kg
€378.29
378,29 € tax excl.
Kit Energy Makita 18V 6.0 Ah
Includes:
Makita DC18RC Battery Charger
2 Makita BL1860B batteries
MAKPAC case
Ideal for use with 18Vx2 tools
€152.46
152,46 € tax excl.
Features:
Suitable for sawing all materials
Unbreakable and flexible back
In hanging case Super fast bi-metal cobalt steel blade
Length 300 mm, teeth per inch 24
Pack of 100 pieces
Out-of-StockSold out
€29.51
29,51 € tax excl.
Rubber backing pad 115x229 mm for random orbit sander.
162172-0 Makita, for tools 9046
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español