€49.28
49,28 € tax excl.
Reversible stainless steel spring bolt article 300
with automatic closing for iron gates or doors
Filter By
Filter By
Home
Filter By
€27.05
27,05 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€8.85
8,85 € tax excl.
505 Combi Automatic Pendulum Metal Adjustable Shutter Stopper
Finish: Black painted - Tropicalized
Length: 150 - 215 mm
Measurements as per pictures.
€4.51
4,51 € tax excl.
CHARACTERISTICS:
Maximum recommended load: 300 kg
Lifting load: 150 kg
Adjustment: 0-25mm
Diameter: Ø 14 mm
Available sizes ( A ): 70 - 120 mm
Requires hex key #4 and screwdriver
Article tested by LGA
ABS,...
€11.00
11,00 € tax excl.
Adjustable molded hinge from Ø22x150
2 wings with edge to be welded, pin adjustable by bolt,
with large capacity thrust bearing
€1.57
1,57 € tax excl.
Plastic foot for kitchen furniture, with adjustable height minus 5 mm plus 20 mm
with mounting support and integrated base for adjustment.
Heights available from 10 - 12 - 15 cm
€7.70
7,70 € tax excl.
Adjustable metal shutter stop with man's head with reversible stop 502
Length: 110 - 180 mm
Measures looks image.
€0.89
0,89 € tax excl.
Ball bearing white- zinc.
Internal diameter measurement (F): 9 - 10 - 11 - 12 - 12.5 - 13 - 14 - 20 mm
Measures looks image.
€16.39
16,39 € tax excl.
Balloon profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-10
To be inserted vertically on the glass. It is mounted on the side of the shower door and thanks to its balloon shapeprevents the...
€10.56
10,56 € tax excl.
15 mm tubular handle in curved iron with rectangular mounting plate and fixing with visible screws
Black painted finish
Available in 180 and 230 mm length
€2.13
2,13 € tax excl.
CHARACTERISTICS:
Maximum recommended load: 400 kg
Adjustment: 0-20mm
Requires hex key no. 6 and special key
Article tested by CTBA
ABS and zama components
Measurements as per pictures.
€1.23
1,23 € tax excl.
10MA screw drilled internally to allow adjustment of the levelling foot from inside the cabinet,
used for assembling the Camar 308 foot in various sizes.
Size: 10MA, length 40mm
Measurements as per pictures.
€1.64
1,64 € tax excl.
CAMAR 809 galvanized iron key for adjusting the 308 series leveling foot for furniture
size: length 200mm, width 80mm, 6mm hexagon
Measurements as per pictures.
€18.59
18,59 € tax excl.
Cariglione handle 385 Black painted for auction article 393 10x10, for wooden and iron windows Combi
WITHDRAWAL VITHS AT THE PLATE 7 cm
Measures as per images.
€51.92
51,92 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 with key lock for wooden and iron windows
Measures as per images.
€33.88
33,88 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 without key block with cylinder for wooden and iron windows
Measures as per images.
€654.92
654,92 € tax excl.
Kamado Monolith JUNIOR in ceramic is equipped with a cooking grill of 33 cm in diameter. Despite its small size, it maintains all the functions of its older brothers, having the ability to carry out both direct and...
€1,392.62
1.392,62 € tax excl.
Kamado Monolith CLASSIC Pro-Series 2.0 in ceramic with a cooking grill of 44 cm in diameter and a weight of 85 kg, the Classic satisfies an entire family. Grill, barbecue, charcoal oven, smoker oven for pizza and...
€818.85
818,85 € tax excl.
Kamado Monolith BASIC in ceramic has a cooking grill diameter of 46 cm and can, like all Kamado Monoliths, be used for grilling, barbecuing, cooking, smoking, roasting, baking pizza and bread and can also adopt all...
€2.05
2,05 € tax excl.
Features:
Recommended maximum load 200 Kg
Adjustment range 0–10 mm
Requires hex adjustment key n°6 or special adjustment key
Item tested by CTBA
Measures looks image.
€20.41
20,41 € tax excl.
Support for cooking ribs in black painted steel. Used upside down it serves as a roasting basket and to facilitate the removal of large pieces of meat. Dimensions: (L x W x H): 34x20x12.5cm.
€84.43
84,43 € tax excl.
Battery arrest at the end of the galvanized cushioned race to pay for sliding gates article 384 Combi
Measures as per images
€6.71
6,71 € tax excl.
Closing system, heavy galvanized vertical slider bolt to be welded article 220 Combi Arialdo
Length from 200 - 300 mm
€27.12
27,12 € tax excl.
Diverting profile-gasket 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-30
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€30.82
30,82 € tax excl.
Diverting profile-gasket 180° for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-30
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.05
27,05 € tax excl.
Diverting profile-gasket anticrushing for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-33
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€20.49
20,49 € tax excl.
Diverting profile-gasket for shower box, glass thickness 10 mm, length 2500 mm 8PT1-20
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€20.29
20,29 € tax excl.
Diverting profile-gasket for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-20
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€31.97
31,97 € tax excl.
Diverting profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT8-25
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.12
27,12 € tax excl.
Double diverting profile-gasket for shower box, glass thickness 6-8 mm, length 2500 mm 8PT8-35
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.79
27,79 € tax excl.
Double diverting profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-35
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€7.30
7,30 € tax excl.
Black apron in fabric for Barbecue with Monolith Logo.
€2.58
2,58 € tax excl.
Fisce medium wing hinge to be welded article 240 Combi Arialdo
2 medium wings, right or left fixed pivot
€0.82
0,82 € tax excl.
2-wing hinge in bent sheet metal article 100 Combi Arialdo, removable pin and washer
Length from 60 - 80 - 100 - 120 - 140 - 170 - 200 mm
€5.28
5,28 € tax excl.
Closing system, galvanized padlock door bolt article 284 6x16 Combi Arialdo
€1.65
1,65 € tax excl.
7.5x7.5 galvanized square female wrench for table 231 with Combi Arialdo square profile
€3.27
3,27 € tax excl.
Galvanized table for 230 Combi iron doors
lever closure with male control panel
use of closing of inspectionable counter boxes
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€13.92
13,92 € tax excl.
Closing system, heavy galvanized padlock door bolt article 286 profile 10x25 Combi Arialdo
€5.44
5,44 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.90
2 open wings, removable pin Ø20, removable washers
€9.30
9,30 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.180
3 open wings, removable pin Ø20, removable washers
€47.54
47,54 € tax excl.
Lateral hinge 180° wall, rectangular for narrow frame, made of aluminum. With its linear and squared design, it perfectly suits various types of interior doors.
Finishes: Anodized aluminum - Matte white - Traffic...
€42.62
42,62 € tax excl.
Lateral hinge 180° square wall for narrow frame, made of aluminum. With its linear and squared design, it perfectly suits various types of interior doors.
Finishes: Anodized aluminum - Matte white - Traffic white -...
€0.93
0,93 € tax excl.
Iron hinge to be welded with 3 wings 105 Combi Arialdo, removable pin removable washers
Length from 80 - 100 - 120 - 140 - 170 - 200 mm
€0.78
0,78 € tax excl.
Printed hinge 255 Combi Arialdo 2 wings with edge for welding, pin with fixed washer
Height from 40 - 60 - 80 - 100 - 120 - 140 mm
€4.51
4,51 € tax excl.
Hinge printed with rib from Ø22x25x150
2 wings with edge to be welded
with large capacity thrust bearing
€2.38
2,38 € tax excl.
FEATURES:
Adjustment: less 5 mm -20 mm
Diameter: Ø 28 mm
Available heights (H): 10 - 12 - 15 cm
Adjustment can both internally and externally
Components ABS and steel
Measures looks image.
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€75.00
75,00 € tax excl.
Kit rectangular handle for glass sliding door, made of aluminium. With its linear and squared shapes, it perfectly fits various types of interior doors.
Finish: Matt chrome
Features:
Glass thickness 8 - 10 mm...
€15.16
15,16 € tax excl.
Large galvanized adjustable hinge hinge for swing gates article 370 Combi Arialdo
Dimensions:
A: 61
B: 46
C: 35
L: 34-46
€1.97
1,97 € tax excl.
FEATURES:
Nominal loading capacity: 400 kg
Adjustment: 0-20 mm
Available heights (H): 4 - 5 - 6 - 8 - 10 cm
Necessary special key for adjustment
One-piece steel tube and socket
Article tested by CTBA...
€2.65
2,65 € tax excl.
Ratchet for medium tropicalized fanlight with open plate (for Art.265/265T/267) to be welded.
Size C: 2-16 mm
Measures looks image.
€62.59
62,59 € tax excl.
Long nylon guide olive with support to be fixed for 452PST Combi sliding gates
Diameter Ø 41x240
€51.92
51,92 € tax excl.
Long olive for nylon guide for 452 Combi sliding gates
Diameter Ø 44x220 fixing by M16 bolt
€100.00
100,00 € tax excl.
Pack of 4 pieces Articuled legs for table, comprising screws, plates and hex wrench.Color stem embossed gray - color terminal stem frosted dark gray.
DIMENSIONS:
Leg height: 700 mm
Leg diameter: Ø 50 mm...
€81.15
81,15 € tax excl.
Pack of 4 Folding table leg, painted aluminium.
Efficiency in 3 steps thanks to the safety lock that gives maximum stability in the support phase and with a simple click and a fluid movement without effort, the leg...
€2.46
2,46 € tax excl.
Pair of adjustable hanging supports (1 right / 1 left) for furniture, available colors White and Brown.
FEATURES:
Nominal loading capacity: 70 kg
Horizontal adjustment: 25 mm
Maximum vertical adjustment: 25 mm...
€399.00
399,00 € tax excl.
Perkomatic 85R6 Hide-draulic door closer
Finishes: Brass - Satin Chrome
€2.70
2,70 € tax excl.
Galvanized key for snap latch article 233 Combi
square profile from 6 to 8 with progressive male
€163.85
163,85 € tax excl.
Plancha Fry Top Ø 60x0.6 cm ideal accessory for griddle cooking for Icon and Junior models only of the new Pro Series 2.0. An initial run-in is recommended before first use. Weight 14 kg.
€270.41
270,41 € tax excl.
The massive Ø 74x0.8 cm steel plate can easily be placed on top of the Monolith Classic open grate. To regulate the heat use the double disc ventilation cap. Before initial use: the best results are obtained after...
€65.49
65,49 € tax excl.
The double-walled, painted steel/aluminium cooler box holds up to 17 litres. By simply adding ice, your meat, ingredients and drinks remain chilled for hours. The carry handle secures the lid, and ensures easy transport.
€34.84
34,84 € tax excl.
Profile inox 8PI1-32 for Profile-gasket magnetic 8PT8-60/61, length 2200 mm
It is mounted as a support opposite to the magnetic profile applied to the shower door.
Measures looks image.
€33.91
33,91 € tax excl.
Profile-gasket magnetic 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-50
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€46.45
46,45 € tax excl.
Profile-gasket magnetic for angle 135°, North-South for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-70/71
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€39.89
39,89 € tax excl.
Profile-gasket magnetic for angle 90° North-South for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-60/61
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€45.33
45,33 € tax excl.
Profile-gasket magnetic for angle 90°, North-South for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-60/61
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€31.07
31,07 € tax excl.
Profile-gasket stop 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-45
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€28.69
28,69 € tax excl.
Stop Profile-gasket 90° for shower box, glass thickness 6-8 mm, length 2500 mm 8PT8-40
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€9.30
9,30 € tax excl.
Closing system, 14 round galvanized deadbolt for 287 Combi Arialdo padlock
€0.70
0,70 € tax excl.
Galvanized Anti-tear with threaded pin for armored door.
Size: M8 - M10
Measures looks image.
€11.88
11,88 € tax excl.
Self-locking drop shutter stop 508 Combi
Finish: Black painted - Tropicalized
Measurements as shown in the images
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€73.69
73,69 € tax excl.
The Wokset includes 5 pieces: Wok, Wok holder, ladle, turning spatula and sieve.
€0.99
0,99 € tax excl.
Sheared hinge cap article 110 Combi
2 wings, pin with fixed washer to be welded
€2.05
2,05 € tax excl.
FEATURES:
Nominal loading capacity: 150 kg
Adjustment: 0-20 mm
Necessary allen key n.6 and special key for adjustment
Article tested by CTBA
Components ABS, steel and zamak
Measures looks image.
€13.85
13,85 € tax excl.
Small galvanized adjustable hinge hinge for swing gates article 370 Combi Arialdo
Dimensions:
A: 44
B: 31
C: 30
L: 31-42
€56.56
56,56 € tax excl.
Features:
Plates Width 2.6 cm and Height 5.4 cm
Barrel diameter 22 mm and Length 14.2 cm
Automatic closing for internal doors up to 50 kg of weight in light to medium applications
Anchor plates with coated...
€22.55
22,55 € tax excl.
Square rod 10x10 for window in galvanized iron article 393
Available sizes: 1500-2000 mm (L)
Measurements as shown in the images.
€28.60
28,60 € tax excl.
Square rod 14x14 for window in galvanized iron article 394
Available sizes: 1500-2000 mm (L)
Measurements as shown in the images.
€5.06
5,06 € tax excl.
Stamped hinge to be welded Ø22 x 150 article 256 Combi
2 wings with rib, fixed pin, removable washer
€9.35
9,35 € tax excl.
Iron pull handle with rectangular mounting plate and fixing with visible screws
Black painted finish
Available in 180 and 230 mm length
€8.80
8,80 € tax excl.
Stylized adjustable metal shutter stop with reversible triangular stop 507 Combi
Finish: Black painted - Tropicalized
Length: 110 - 180 mm
Measurements as shown in the images.
Showing 1-90 of 122 item(s)
Italiano
Français
Deutsch
Español