€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€654.92
654,92 € tax excl.
Kamado Monolith JUNIOR in ceramic is equipped with a cooking grill of 33 cm in diameter. Despite its small size, it maintains all the functions of its older brothers, having the ability to carry out both direct and...
€1,392.62
1.392,62 € tax excl.
Kamado Monolith CLASSIC Pro-Series 2.0 in ceramic with a cooking grill of 44 cm in diameter and a weight of 85 kg, the Classic satisfies an entire family. Grill, barbecue, charcoal oven, smoker oven for pizza and...
€818.85
818,85 € tax excl.
Kamado Monolith BASIC in ceramic has a cooking grill diameter of 46 cm and can, like all Kamado Monoliths, be used for grilling, barbecuing, cooking, smoking, roasting, baking pizza and bread and can also adopt all...
€8.18
8,18 € tax excl.
Used as a powerful paint remover.
Ready-to-use extra-strong semi-fluid liquid for the removal of grease, sludge and encrustations of carbonized dirt from metal surfaces.
Composed of selected and stabilized solvents...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€20.41
20,41 € tax excl.
Support for cooking ribs in black painted steel. Used upside down it serves as a roasting basket and to facilitate the removal of large pieces of meat. Dimensions: (L x W x H): 34x20x12.5cm.
€0.12
0,12 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€16.39
16,39 € tax excl.
Brass Cremonese for Ghidini Milena window frames
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€10.66
10,66 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes and 7 mm spindle
€9.84
9,84 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes.
€19.67
19,67 € tax excl.
Aluminum handle with compass for window and frames. Powder coating.
Available colors:
Silver anodized (F1)
Champagne anodized (F2)
Gold anodized (F3)
Anodized bronze (F4)
Polished Brass (GCTOL)...
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€7.30
7,30 € tax excl.
Black apron in fabric for Barbecue with Monolith Logo.
€5.16
5,16 € tax excl.
TWO-COMPONENT POLYESTER STUCCO with high viscosity, specially formulated to glue, repair and plaster marble, granite, stone or travertine.Easy to apply the hardened product is very bright and perfectly polishable....
€16.44
16,44 € tax excl.
Milena 45x9 mm free/busy latch for bathroom WC doors 6x6 square
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
Measurements as per pictures.
Ghidini Handle Garage doors cylinder hole Ø 25 mm, centre distance 67 mm moved, Kit CIL D25 INT67 SP
€24.51
24,51 € tax excl.
Tilting kit with cylinder hole Ø 25mm wheelbase 67mm offset for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)...
€22.95
22,95 € tax excl.
Door handle with plate
Available finishes: Polished painted brass - Satin chromed brass - Scratched bronze painted brass - Polished chromed brass
Available wheelbases: 7 cm - 8.5 cm (Yale hole) - 9 cm
€9.84
9,84 € tax excl.
Brass hammer for window and door frames with 7 mm square mechanism
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€42.95
42,95 € tax excl.
Mignon bulky handle in zama with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€28.69
28,69 € tax excl.
Zama handle with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€23.77
23,77 € tax excl.
Tilting kit with cylinder hole Ø 25 mm wheelbase 67 mm for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin...
€23.77
23,77 € tax excl.
Handle kit for YALE 60 overhead door.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin Chrome (GCTCS)...
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€63.93
63,93 € tax excl.
Kit composed of 5 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€57.20
57,20 € tax excl.
Kit composed of 5 Packs of waxed yellow zinc plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€47.35
47,35 € tax excl.
Kit composed of 6 Packs of waxed yellow zinc plated screws Torx:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25/18 mm (500 pcs)
CSK...
€37.79
37,79 € tax excl.
Kit composed of 6 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw for...
€33.61
33,61 € tax excl.
Kit composed of 6 Packs of waxed white galvanized screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€21.65
21,65 € tax excl.
Door handle with rosette and escutcheon
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.67
4,67 € tax excl.
BISTUK METAL is a two-component, spatulable polyester putty, to be used on sheet metal, galvanized sheet metal, steel, aluminum, light alloys and fiberglass. Easy to apply and sand, excellent verticability.Product...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€163.85
163,85 € tax excl.
Plancha Fry Top Ø 60x0.6 cm ideal accessory for griddle cooking for Icon and Junior models only of the new Pro Series 2.0. An initial run-in is recommended before first use. Weight 14 kg.
€270.41
270,41 € tax excl.
The massive Ø 74x0.8 cm steel plate can easily be placed on top of the Monolith Classic open grate. To regulate the heat use the double disc ventilation cap. Before initial use: the best results are obtained after...
€65.49
65,49 € tax excl.
The double-walled, painted steel/aluminium cooler box holds up to 17 litres. By simply adding ice, your meat, ingredients and drinks remain chilled for hours. The carry handle secures the lid, and ensures easy transport.
€4.92
4,92 € tax excl.
Medical and Surgical Unit Reg. N ° 18563 and n ° 19765 of the Ministry of Health in conversion to Biocide, according to EU regulation n.528 / 2012
Special formulation for the protection of antique furniture, wooden...
€12.30
12,30 € tax excl.
Medical and Surgical Unit Reg. N ° 18563 and n ° 19765 of the Ministry of Health in conversion to Biocide, according to EU regulation n.528 / 2012
Special formulation for the protection of antique furniture, wooden...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€15.57
15,57 € tax excl.
ECO round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass
Measurements as per pictures.
€28.32
28,32 € tax excl.
SCROSS 1B round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as...
€3.84
3,84 € tax excl.
Ghidini round sliding door drag handle
Available finishes: Burnished brass - Polished chrome brass - Satin chrome brass - Polished painted brass
Measurements as per pictures.
€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
-30%
€5.01
€7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.31
€6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.17
€5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€73.69
73,69 € tax excl.
The Wokset includes 5 pieces: Wok, Wok holder, ladle, turning spatula and sieve.
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€8.52
8,52 € tax excl.
Kit SCORRI 3 round blind for Ghidini sliding door
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as per pictures.
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
Showing 1-90 of 139 item(s)
Italiano
Français
Deutsch
Español