€9.17
9,17 € tax excl.
Lightweight brass bolt lock vertical mounting
Available in Glossy and Bronze
Sizes: 150 - 200 - 250 - 300 - 400 - 500 - 600
Filter By
Filter By
Home
Filter By
€10.96
10,96 € tax excl.
Light brass tail lock bolt for locking shutters.
Available in Glossy - Bronzed
Sizes: 200 - 250 - 300 - 400 - 500 - 600
€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€9.02
9,02 € tax excl.
Square brass support for handrail or handrail
Available in the following finishes: Glossy painted - Bronzed - Chromed - Satin chrome
€2.97
2,97 € tax excl.
Brass door stop locking pliers
with Meeting A and Meeting B
Available Polished - Bronzed - Chromed - Satin Chrome
€22.34
22,34 € tax excl.
Brass hinge in right-left thickness, Pomellas type
with straight built-in wings
Finish: Polished - Bronzed - Chromed
Measurements DX-SX: 100 - 120 - 140
€3.20
3,20 € tax excl.
Locking ratchet for closing transom windows or for bottom hung windows
with Meeting A and Meeting B
Available in Polished - Bronzed - Chromed - Satin Chrome
€15.38
15,38 € tax excl.
Deadbolt bar for recessed tightening on wood to lock shutters.
Available in Polished - Bronzed
Measurements: 100 - 150 - 200 - 250 - 300 - 400 - 500 - 600
€10.66
10,66 € tax excl.
Wall mounted handrail bracket with single dowel, mounting base for round handrail
Available Glossy painted - Bronzed - Satin chrome
€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€654.92
654,92 € tax excl.
Kamado Monolith JUNIOR in ceramic is equipped with a cooking grill of 33 cm in diameter. Despite its small size, it maintains all the functions of its older brothers, having the ability to carry out both direct and...
€1,392.62
1.392,62 € tax excl.
Kamado Monolith CLASSIC Pro-Series 2.0 in ceramic with a cooking grill of 44 cm in diameter and a weight of 85 kg, the Classic satisfies an entire family. Grill, barbecue, charcoal oven, smoker oven for pizza and...
€818.85
818,85 € tax excl.
Kamado Monolith BASIC in ceramic has a cooking grill diameter of 46 cm and can, like all Kamado Monoliths, be used for grilling, barbecuing, cooking, smoking, roasting, baking pizza and bread and can also adopt all...
€5.74
5,74 € tax excl.
Brass locking bolt with round rod complete with striker and locking lever
Available in sizes: 60 - 80 - 100 - 120 - 150 - 200 mm
Finishes: Polished - Bronzed - Nickel-plated
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€20.41
20,41 € tax excl.
Support for cooking ribs in black painted steel. Used upside down it serves as a roasting basket and to facilitate the removal of large pieces of meat. Dimensions: (L x W x H): 34x20x12.5cm.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€26.23
26,23 € tax excl.
Entrance C = 30 mm
Box size 55 x 50 mm
180° rotation - 2 extractions.
Cylinder in polished chromed brass, with pins, size 16 x 22 mm
2 keys.
€15.00
15,00 € tax excl.
Rotation 360° right - 2 pull-outs, stroke 12 nylon base.
Zamak cylinder with slats
Screw or weld plate fixing.
Dimensions as per pictures.
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€7.30
7,30 € tax excl.
Black apron in fabric for Barbecue with Monolith Logo.
€2.46
2,46 € tax excl.
Shaped brass latch base 31 mm
Available in sizes: 50 - 60 - 80 - 100 - 120 - 140 - 160mm
Finishes: Polished - Bronzed - Nickel-plated
€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€28.69
28,69 € tax excl.
Rotation 360° left - 2 extractions.Polished chrome plated brass cylinder with pins. Screw fixing.2 keys.Dimensions as per pictures. (L= 8 mm)
€30.30
30,30 € tax excl.
180° rotation - 2 pull-outs.
Polished chrome plated brass cylinder with pins.
Screw fixing.
2 keys.
Dimensions as per pictures. (L= 19 mm)
€31.21
31,21 € tax excl.
180° rotation - 2 pull-outs.
Polished chrome plated brass cylinder with pins.
Screw fixing.
2 keys.
Dimensions as per pictures. (L= 30 mm)
€6.12
6,12 € tax excl.
Light weight brass deadbolt bar for horizontal mounting
Available in Glossy and Bronze
Sizes: 80 - 130 - 150 - 200 - 250 - 300
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€14.75
14,75 € tax excl.
For Prefer locks: B551 - 8651 - 8652 - 8653 - W551
Features:
Black plastic material
For locks with round cylinder
Wheelbase 67 mm
Measures looks image.
€14.75
14,75 € tax excl.
Features:
Black plastic material
For locks with shaped cylinder
Wheelbase(A) 60 mm
Handle height(B) 106 mm
Distance between fixing holes(C) 44 mm
Distance between fixing holes(H) 144 mm
Measures looks image.
€14.75
14,75 € tax excl.
Features:
Black plastic material
For locks with shaped cylinder
Wheelbase(A) 70 mm
Handle height(B) 116 mm
Distance between fixing holes(C) 39 mm
Distance between fixing holes(H) 138.5 mm
Measures looks image.
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€20.49
20,49 € tax excl.
Application: on roller shutter blade.
Operation: rack and pinion, movement with knob from inside.
Finish: galvanised box.
Accessories: on request, fixing plate code 0450.0000.0000 - 0450.0040.0000 0450.0050.0000...
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€5.74
5,74 € tax excl.
Tropicalized steel spring safety ratchet
Replacement accessory for wooden folding tables, beer tables, restaurants and wooden benches.
60x70 mm base - Height 37 mm
Slotted hole spacing 40 - 60 mm
€53.43
53,43 € tax excl.
Application: mortise lock for metal profiles and wooden doors.
Functioning: Reversible latch operated by handle and also by key, 1-way locking with key.
Finishing: raw latch, galvanised box.
Accessories:...
€20.49
20,49 € tax excl.
Application: mortise lock for transit doors.
Functioning: reversible latch operated by handle, 1-way locking with key.
Finishing: brass latch, galvanized box.
Accessories: handle code 0443
Dimensions as per...
€26.38
26,38 € tax excl.
Application: 1 lock top side
Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever
Finish: normal cylinder brass, lock zinc plated
Cylinder Ø...
€71.31
71,31 € tax excl.
Application: on up-and-over doors, with transit doors
Operation: from inside and outside opening with handle, unlocking from outside with key, from inside with lever
Finish: normal brass cylinder, galvanised lock...
€29.51
29,51 € tax excl.
Application: 1 lock top side
Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever
Finish: security cylinder sandblasted and nickel-plated,...
€27.30
27,30 € tax excl.
Application: 1 lock on top side
Operation: from inside and outside, opening with handle, unlocking from outside with key, from inside with lat. lever
Finish: standard brass cylinder, galvanised lock
With internal...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€163.85
163,85 € tax excl.
Plancha Fry Top Ø 60x0.6 cm ideal accessory for griddle cooking for Icon and Junior models only of the new Pro Series 2.0. An initial run-in is recommended before first use. Weight 14 kg.
€270.41
270,41 € tax excl.
The massive Ø 74x0.8 cm steel plate can easily be placed on top of the Monolith Classic open grate. To regulate the heat use the double disc ventilation cap. Before initial use: the best results are obtained after...
€65.49
65,49 € tax excl.
The double-walled, painted steel/aluminium cooler box holds up to 17 litres. By simply adding ice, your meat, ingredients and drinks remain chilled for hours. The carry handle secures the lid, and ensures easy transport.
€14.75
14,75 € tax excl.
Prefer multi-drawer lock, 360° right rotation - 2 extractions - 180° compass rotation
Brass cylinder with pins, white nylon body, with two keys
€14.75
14,75 € tax excl.
Prefer chest of drawers lock, 360° right rotation - 2 extractions - 180° compass rotation
Brass cylinder with pins, white nylon body with two keys
€14.75
14,75 € tax excl.
Prefer chest of drawers lock, 360° right rotation - 2 extractions
white nylon outer body, screw fixing, with two keys
€30.86
30,86 € tax excl.
Application: for metal transit doors.
Operation: handle -operated spring latch, locks from inside and outside with key.
Finish: brass cylinder, galvanized case.
Square spring latch (2 keys supplied), B= 7 mm...
€30.86
30,86 € tax excl.
Application: for metal transit doors.
Operation: handle -operated spring latch, locks from inside and outside with key.
Finish: brass cylinder, galvanized case.
Square spring latch (2 keys supplied), B= 7 mm...
€36.68
36,68 € tax excl.
Application: for metal transit doors.
Operation: handle -operated spring latch, locks from inside and outside with key.
Finish: brass cylinder, galvanized case.
Round spring latch (2 keys supplied), B= 11 mm...
€33.40
33,40 € tax excl.
Application: for metal transit doors.
Operation: handle -operated spring latch, locks from inside and outside with key.
Finish: brass cylinder, galvanized case.
Round spring latch (2 keys supplied), B= 11 mm...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€18.94
18,94 € tax excl.
Brass folding knob hinge for doors and windows
assembly with recessed plate and exposed hinge
Finish: Polished - Bronzed - Chromed
Measurements DX-SX: 80x50 - 100x55 - 100x60 - 120x60 - 120x75 -...
€19.41
19,41 € tax excl.
Brass folding knob hinge for doors and windows
mounting with recessed plate and visible long hinge
Finish: Polished - Bronzed - Chromed
Right-left measurements: 100x65 - 120x70 - 140x75
€30.15
30,15 € tax excl.
Application: on roller shutter blade.
Operation: by rack, movement both from outside and inside with key.
Finish: brass cylinder, galvanised box.
Accessories: on request, fixing plate code 0430.0000.0000 -...
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
Showing 1-90 of 157 item(s)
Italiano
Français
Deutsch
Español