€73.77
73,77 € tax excl.
Cast iron swivel table vise with jaws attached.
Opening mm 150
Jaws mm 150
Depth mm 70
Net weight kg 11.3
Filter By
Filter By
Home
Filter By
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€1.56
1,56 € tax excl.
Joint for the series connection of two pipes with automatic fittings installed at the ends.
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€376.23
376,23 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 2.3
Engine 6.5 Hp
Displacement 212 cc
Voltage 230V
Single-phase synchronous...
€901.64
901,64 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€11.07
11,07 € tax excl.
Fireproof Adapter with 16 A plug and industrial socket. IP20.
€11.07
11,07 € tax excl.
Fireproof Adapter with industrial plug and universal socket. IP20.
€11.39
11,39 € tax excl.
Valex adjustable metal mesh visor, adjustable from the rear. to EN1731 standards
€11.89
11,89 € tax excl.
Chrome vanadium steel body - Jaws finish: glossy - Soft grip.
Dimensions: Length 300 mm, max opening 50 mm
€2.46
2,46 € tax excl.
Easy spray lance with quick connector for irrigation hose - Two-component material - Plastic body - Soft grip - Continuous jet adjustment.
€6.48
6,48 € tax excl.
Adjustable metal broom with galvanized steel Valex handle, Adjustable width 180-630 mm
€7.38
7,38 € tax excl.
Steel body - Finishing of the jaws: glossy - Ergonomic handle.
Length 240 mm
Maximum aperture 35 mm
Net weight 344 gr
€5.66
5,66 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and push release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€6.15
6,15 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and pull release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
€3.47
3,47 € tax excl.
Adjusting the left/right depth (optional) Blum
Suitable for plastic T51.7601 gray-colored powder dust
€17.13
17,13 € tax excl.
Airbrush with Valex drop tank equipped with bayonet quick coupling
TECHNICAL DATA
Pressure bar: 3
Air consumption l / min: 150
Tank l: 0.6
Type of attack: Bayonet and rapid
Ø hole nozzle mm: 1,5
€17.95
17,95 € tax excl.
Non-slip handle - Pressure gauge up to 11 bar - Height 65 cm - Tube diameter 3.8 cm - Double inflation connection - Supplied with adapters for inflating balls and mats.
€73.69
73,69 € tax excl.
Platform measures 255x270 mm with safety hooks against accidental closure - Non-slip steps in extruded aluminum 80 mm wide - Non-slip feet - Compliance with EN 131 standards - Capacity 150 kg - Upright section 40x20...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions.
Power 2000W
No-load speed 6500 rpm...
€24.59
24,59 € tax excl.
Disc lock button - Safety switch to prevent accidental startup - Adjustable disc guard - Front handle fixed in 2 positions.
Power 650W
No-load speed 11,500 rpm
Disc Ø 115 mm
Net weight 1.6 Kg
€110.57
110,57 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions.
Voltage 18 V
No-load...
€118.77
118,77 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions - The brushless motor...
€8.11
8,11 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€7.79
7,79 € tax excl.
Coated steel stranded cable - Supplied with 2 keys.
Cable length 1000 mm
Cable diameter 18 mm
€55.33
55,33 € tax excl.
To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter -...
€35.98
35,98 € tax excl.
Auto CU battery connection cables
Copper cables with insulated pliers. Cable section 25 mm², cable length 2.5 m.
€9.00
9,00 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 90-220mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€4.51
4,51 € tax excl.
Chrome vanadium steel body - Black oxide finish - Plastic holder.
Sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mm
Length 45 - 65 mm
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€49.10
49,10 € tax excl.
Foldable tank with support structure - With tap and quick connection to connect the irrigation hose - Ideal for rainwater recovery and garden irrigation.
Dimensions ØxH 600x920 mm
Capacity 250 Litres
€0.54
0,54 € tax excl.
Pre-assembly base for Clip Top Hinge
Cross pre-assembly plate with Euro screw Ø 6 mm.
Distance: 0mm/3mm
Material: Steel
Surface: Nickel-plated
Fixing: Euro screw, Distance between fixing positions: 32 mm -...
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€6.48
6,48 € tax excl.
Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut.
Dimensions:
Length 25 cm
Width 38 cm (handles included)
€4.92
4,92 € tax excl.
Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 21 cm
Width 16 cm
€4.92
4,92 € tax excl.
Pizza roller made of beech wood, ideal for preparing pizzas and doughs.
Dimensions:
Length 23 cm
Width 13 cm
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Diameter Ø 38 mm
Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 28.5 cm
Large: Length 34 cm
€1.31
1,31 € tax excl.
Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 26.5 cm
Large: Length 33.5 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small with 2 Pockets: Length 32 cm - Width 20 cm
Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 33 cm
Width 6 cm
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€196.64
196,64 € tax excl.
To cut wood and derivatives, plastic and foam materials - Possibility of making straight, transverse and inclined cuts.
Technical data :
- power 2000W - rpm at no load 4,800 - blade dimens. / teeth Ø250xø30mm /...
€110.66
110,66 € tax excl.
Spindle shaft on ball bearings - Worktable material in cast iron.
Power 350W
Number of speeds 5
No-load speed 630 - 2,800 RPM
Chuck 13 mm
Chuck fitting B16 MT2
Spindle travel 50 mm
Worktable 160x160 mm...
€2.05
2,05 € tax excl.
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€39.26
39,26 € tax excl.
Connectable to petrol-powered augers with a crankshaft Ø 20 mm - Tip with a hardened steel plate.
Diameter Ø 20 cm
Length 80 cm
Suitable for petrol-powered auger AUGER 50/52.
€10.25
10,25 € tax excl.
Protection rating IP55 - Natural light 4000K - Twilight and motion sensor - Sensor angle 120° - Rear courtesy light - 2 operating modes: Mode A turns on at medium brightness in the dark, switches to 100% when motion...
€11.07
11,07 € tax excl.
3 universal sockets - 6 lateral 10 / 16A bypass sockets - Italian plug with 16A earth contact - safe: in fireproof material - cable length 1.5 m - cable section 3x1.5 mm² - With switch.
€3.28
3,28 € tax excl.
Body in plastic material - Quick connection - For precision blowing in inaccessible places.
€0.82
0,82 € tax excl.
CHARACTERISTICS:
Application: for fixing mobile parts
Plastic housing with pre-assembled zinc eccentric
Plastic connecting element
Available colors: White and Brown
Dimensions (height / width / depth):...
€57.38
57,38 € tax excl.
Blum AMBIA-LINE film holder, for drawer height M and height K from a nominal length of 450 mm.
Double unit, transparent and aluminum film holder.
Length 356 mm Width 200 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening, external stop cover.
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening, half external rabbet cover.
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€0.82
0,82 € tax excl.
CLIP pre-assembly plate, straight, 0 mm, Steel, for screwing on chipboard screws.
Recommended standard pre-assembly plates for Aventos HK-XS
The spacer depends on the upper gap
€4.10
4,10 € tax excl.
Blum CLIP top 70T5550.TL standard 120° hinge, Overlay hinge, without spring, base: To be screwed
Includes base 175H3100
€7.38
7,38 € tax excl.
Clip Top hinge for furniture with column with integrated Blumotion Opening 95°
* Buy with pre-assembly base of 3 mm *
€5.74
5,74 € tax excl.
Central hinge for AVENTOS for folding door 134°, without spring, 78Z550.T
Includes base 173H7100
€1.30
1,30 € tax excl.
Blum hinge recommended for CLIP top 110 ° TIP-ON
EXTRA DISCOUNT FOR PACKAGING
€16.31
16,31 € tax excl.
Blum springless hinge for glass and mirror doors 79C450BT complete with base plate to be glued onto the door 78C4568 no glass drilling required
€24.51
24,51 € tax excl.
Blum knife holder AMBIA-LINE, for drawer height M and height K by a nominal length of 450 mm
Length 409 mm Width 187 mm, for 9 knives
€36.89
36,89 € tax excl.
Portaposate in acciaio Inox Blum Orga-Line
Per corpo mobile 551-599 mm
Lunghezza nominale cassetto 450 mm
€48.36
48,36 € tax excl.
Portaposate in acciaio Inox Blum Orga-Line
Lunghezza nominale cassetto : 500 mm
Lunghezza : 474 mm
Larghezza minima : 200 mm
Altezza : 64.2 mm
€0.76
0,76 € tax excl.
Blum support platelet starboard to screw, recessed
Available in colors:
SW (White Silk)
PG (Platinum Grey)
TS (Black Earth)
€3.40
3,40 € tax excl.
Piston recessed push-open doors for Ø 10 plastic.Available in short version, 50 mm and 76 mm long version and colors SW (Black Silk), PG (Platinum Grey), TS (black earth)
EXTRA DISCOUNT FOR PACKAGING
€7.30
7,30 € tax excl.
Tilting steel blade with set and hardened teeth
- Steel structure
- blade 530 mm
- teeth / thumb 4
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
€12.30
12,30 € tax excl.
Bracket folding BLUM AVENTOS HK-XS Standard opening angle 105 °
In case of hinges with smaller aperture angle, this is limited by the hinge
EXTRA DISCOUNT FOR PACKAGING
€10.57
10,57 € tax excl.
Bracket folding BLUM AVENTOS HK-XS Standard opening angle 105 °
In case of hinges with smaller aperture angle, this is limited by the hinge
EXTRA DISCOUNT FOR PACKAGING
€9.43
9,43 € tax excl.
Waste collector with aluminum support, suitable for remote collection of hazardous material.
Technical data:
- Length 76 cm
- Plastic coated presile with gripping tips
- Opening 9 cm
- Small magnet at the tip...
€10.66
10,66 € tax excl.
For bricks and joints.
Width 35 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€16.31
16,31 € tax excl.
Internal tray with compartments - 2 keys supplied.
Dimensions: 250x200x90 mm
Showing 1-90 of 642 item(s)
Italiano
Français
Deutsch
Español