€73.77
73,77 € tax excl.
Cast iron swivel table vise with jaws attached.
Opening mm 150
Jaws mm 150
Depth mm 70
Net weight kg 11.3
Filter By
Filter By
Home
Filter By
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€13.11
13,11 € tax excl.
Kit of 2 galvanized ropes for garage overhead spare parts complete with T-hook and wire locking terminals133-wire formation (7x19)Breaking load 900 Kg (1900 LB)Rope diameter ø 4 mmLength 3 meters
€1.56
1,56 € tax excl.
Joint for the series connection of two pipes with automatic fittings installed at the ends.
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€376.23
376,23 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 2.3
Engine 6.5 Hp
Displacement 212 cc
Voltage 230V
Single-phase synchronous...
€901.64
901,64 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€11.07
11,07 € tax excl.
Fireproof Adapter with 16 A plug and industrial socket. IP20.
€11.07
11,07 € tax excl.
Fireproof Adapter with industrial plug and universal socket. IP20.
€11.39
11,39 € tax excl.
Valex adjustable metal mesh visor, adjustable from the rear. to EN1731 standards
€11.89
11,89 € tax excl.
Chrome vanadium steel body - Jaws finish: glossy - Soft grip.
Dimensions: Length 300 mm, max opening 50 mm
€2.46
2,46 € tax excl.
Easy spray lance with quick connector for irrigation hose - Two-component material - Plastic body - Soft grip - Continuous jet adjustment.
€6.48
6,48 € tax excl.
Adjustable metal broom with galvanized steel Valex handle, Adjustable width 180-630 mm
€10.07
10,07 € tax excl.
Metal strike plate (New 1.06463.73.0) for "European Chamber" profiles, laterally adjustable for mortise lock. Silver finish.
Possibility of combining with Cisa 16000 - 46000
Measures looks image.
€8.19
8,19 € tax excl.
Metal strike plate (New 1.06465.73.0) for "European Chamber" profiles, laterally adjustable for mortise lock. Silver finish.
Possibility of combining with Cisa 1.06443.00.21/31 - 1.06443.00.0.26/36 - 1.06443.00.0 - 1...
€6.90
6,90 € tax excl.
Metal strike plate (New 1.06465.52.0) for "European Chamber" profiles, laterally adjustable by 4 mm for mortise lock. Black finish.
Possibility of combining with Cisa 06443.21 - 06443.26 - 06444.30 - 06444.35 -...
€7.38
7,38 € tax excl.
Steel body - Finishing of the jaws: glossy - Ergonomic handle.
Length 240 mm
Maximum aperture 35 mm
Net weight 344 gr
€5.66
5,66 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and push release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€6.15
6,15 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and pull release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€8.20
8,20 € tax excl.
Stainless steel strike plate (Old 1.06463.18.0 and now New 1.06463.82.0) for "European Chamber" profiles, laterally adjustable for mortise lock. Stainless steel finish.
Supplied accessories:
Nylon shims art....
€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
€17.13
17,13 € tax excl.
Airbrush with Valex drop tank equipped with bayonet quick coupling
TECHNICAL DATA
Pressure bar: 3
Air consumption l / min: 150
Tank l: 0.6
Type of attack: Bayonet and rapid
Ø hole nozzle mm: 1,5
€17.95
17,95 € tax excl.
Non-slip handle - Pressure gauge up to 11 bar - Height 65 cm - Tube diameter 3.8 cm - Double inflation connection - Supplied with adapters for inflating balls and mats.
€73.69
73,69 € tax excl.
Platform measures 255x270 mm with safety hooks against accidental closure - Non-slip steps in extruded aluminum 80 mm wide - Non-slip feet - Compliance with EN 131 standards - Capacity 150 kg - Upright section 40x20...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions.
Power 2000W
No-load speed 6500 rpm...
€24.59
24,59 € tax excl.
Disc lock button - Safety switch to prevent accidental startup - Adjustable disc guard - Front handle fixed in 2 positions.
Power 650W
No-load speed 11,500 rpm
Disc Ø 115 mm
Net weight 1.6 Kg
€110.57
110,57 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions.
Voltage 18 V
No-load...
€118.77
118,77 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions - The brushless motor...
€8.11
8,11 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€7.79
7,79 € tax excl.
Coated steel stranded cable - Supplied with 2 keys.
Cable length 1000 mm
Cable diameter 18 mm
€40.75
40,75 € tax excl.
Armored steel security padlock with LIM key, replaceable and recodeable cylinder, 2 keys supplied
CHARACTERISTICS
Monobloc body in carbonitrided steel with anti-corrosion chemical nickel plating treatment...
€55.33
55,33 € tax excl.
To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter -...
€4.10
4,10 € tax excl.
Chromed metal double-joint hinges for toilet lid and seat
Complete with mounting gaskets
€35.98
35,98 € tax excl.
Auto CU battery connection cables
Copper cables with insulated pliers. Cable section 25 mm², cable length 2.5 m.
€9.00
9,00 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 90-220mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€4.51
4,51 € tax excl.
Chrome vanadium steel body - Black oxide finish - Plastic holder.
Sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mm
Length 45 - 65 mm
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€49.10
49,10 € tax excl.
Foldable tank with support structure - With tap and quick connection to connect the irrigation hose - Ideal for rainwater recovery and garden irrigation.
Dimensions ØxH 600x920 mm
Capacity 250 Litres
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€6.48
6,48 € tax excl.
Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut.
Dimensions:
Length 25 cm
Width 38 cm (handles included)
€4.92
4,92 € tax excl.
Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 21 cm
Width 16 cm
€4.92
4,92 € tax excl.
Pizza roller made of beech wood, ideal for preparing pizzas and doughs.
Dimensions:
Length 23 cm
Width 13 cm
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Diameter Ø 38 mm
Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 28.5 cm
Large: Length 34 cm
€1.31
1,31 € tax excl.
Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 26.5 cm
Large: Length 33.5 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small with 2 Pockets: Length 32 cm - Width 20 cm
Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 33 cm
Width 6 cm
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€196.64
196,64 € tax excl.
To cut wood and derivatives, plastic and foam materials - Possibility of making straight, transverse and inclined cuts.
Technical data :
- power 2000W - rpm at no load 4,800 - blade dimens. / teeth Ø250xø30mm /...
€110.66
110,66 € tax excl.
Spindle shaft on ball bearings - Worktable material in cast iron.
Power 350W
Number of speeds 5
No-load speed 630 - 2,800 RPM
Chuck 13 mm
Chuck fitting B16 MT2
Spindle travel 50 mm
Worktable 160x160 mm...
€2.05
2,05 € tax excl.
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€39.26
39,26 € tax excl.
Connectable to petrol-powered augers with a crankshaft Ø 20 mm - Tip with a hardened steel plate.
Diameter Ø 20 cm
Length 80 cm
Suitable for petrol-powered auger AUGER 50/52.
€10.25
10,25 € tax excl.
Protection rating IP55 - Natural light 4000K - Twilight and motion sensor - Sensor angle 120° - Rear courtesy light - 2 operating modes: Mode A turns on at medium brightness in the dark, switches to 100% when motion...
€11.07
11,07 € tax excl.
3 universal sockets - 6 lateral 10 / 16A bypass sockets - Italian plug with 16A earth contact - safe: in fireproof material - cable length 1.5 m - cable section 3x1.5 mm² - With switch.
€3.28
3,28 € tax excl.
Body in plastic material - Quick connection - For precision blowing in inaccessible places.
€7.30
7,30 € tax excl.
Tilting steel blade with set and hardened teeth
- Steel structure
- blade 530 mm
- teeth / thumb 4
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
-30%
€8.48
€12.11
8,48 € tax excl.
Button for electric mortise lock. Brass finish.
Supplied accessories:
Fixing screws
Suitable for Cisa 12010 - 12011 - 12015 - 12016.
Measures looks image.
-30%
€5.08
€7.25
5,08 € tax excl.
Features:
Width (A) 20 - 25 - 30 - 40 - 50 - 60 - 70 mm
Solid brass monobloc body
Nickel-plated carbonitrided steel shackle
Double shackle locking system (excluding item 1.21010.20/25)
Brass plate against...
-30%
€8.24
€11.77
8,24 € tax excl.
Features:
Width (A) 30 - 40 - 50 mm
Solid brass monobloc body
Nickel-plated carbonitrided steel shackle
Double shackle locking system
Brass plate against lock-picking
Supplied accessories:
2 keys...
€9.43
9,43 € tax excl.
Waste collector with aluminum support, suitable for remote collection of hazardous material.
Technical data:
- Length 76 cm
- Plastic coated presile with gripping tips
- Opening 9 cm
- Small magnet at the tip...
€10.66
10,66 € tax excl.
For bricks and joints.
Width 35 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€16.31
16,31 € tax excl.
Internal tray with compartments - 2 keys supplied.
Dimensions: 250x200x90 mm
€43.36
43,36 € tax excl.
Depth and sharpening angle adjustment - Adjustable clamp ±35°.
Power 85W
No-load speed 5,800 rpm
Manual chain feed
Grinding wheel outer diameter Ø 108 mm
Grinding wheel hole Ø 23.2 mm
Grinding wheel thickness...
€31.97
31,97 € tax excl.
Adjustable leg for peninsula 960 Cieffe.
Available finishes: Chrome, Black and white painted
Height max: 940 mm
Height min: 690 mm
Diameter: 80 mm
Circular plate: 128 mm
€79.10
79,10 € tax excl.
Aluminum support plate - Safety switch against accidental ignition - Soft handle - Dust extraction arrangement.
Power 1400W
Idle rpm 4800
Blade size/teeth Ø190xø20mm/Z24
Teeth material hard metal
Max cut 90°: 68...
€4.92
4,92 € tax excl.
Head and tip in plastic material - Adjustable width of the irrigated sector from 0°-360° - Intermittent operation - Possibility of irrigation in series via front attachment.
Range 10 meters
€21.31
21,31 € tax excl.
Series locks: art. 11521-540-551-560, 11610-611-630-631-660-661-670-671, 11721-731-761-771,11823,11921-931.
Adjustable, right (R) or left (L), Voltage 12 Volt AC
Finish: blue nylon
€16.31
16,31 € tax excl.
Brass oval cylinder, double knob cylinder, black nylon knob
Size: 28/28
L : 55.4
A: 27.7
B: 27.7
CHARACTERISTICS
- Brass body
- Brass cylinders
- Brass pins
- Cylindrical and mushroom-shaped anti-pick brass...
€14.75
14,75 € tax excl.
Astral European safety profile cylinder with 3 master keys and 1 construction key.
Measure: 35-50 (A-B) mm (L=total length 85 mm)
Finish: Sanded brass
€56.91
56,91 € tax excl.
Reverse cylinder electric rim lock, self-locking latch, zinc coating, nozzle.
FEATURES
Box and nozzle steel with zinc coating
Self-locking latch
Voltage 12 V ca CE
Current absorbed 2,5A
Endowment:...
€94.18
94,18 € tax excl.
Electric lock to be recessed for cylinder, latch and deadbolt with manual return
CHARACTERISTICS
- Steel box with zinc coating
- Front and striking plate in satin brass
- Reversible electrified latch
-...
€63.93
63,93 € tax excl.
Cylinder electric lock mid-rail type h 77 mm, reversible, available backset 70 - 80 - 90 mm, Centre Distance 67 mm, Front 160x16 mm
TECHNICAL FEATURES:
Box height 77 mm
Box with zinc coating
Front with zinc...
€168.45
168,45 € tax excl.
Cylinder electric lock for armoured doors, 2 throw, reversible, backset 64 mm, Centre Distance 85 mm. Latch-bolt and electrically controlled dead-locking latch-bolt, voltage:12 V ac CE, slide item 1.06224.50.0,...
€221.31
221,31 € tax excl.
Double bitted key electric lock for armoured doors, 4 throw, reversible, backset 64 mm, Centre Distance 85 mm. Latch-bolt and electrically controlled dead-locking latch-bolt, voltage: 12 V ac CE , slide item...
Showing 1-90 of 692 item(s)
Italiano
Français
Deutsch
Español