€26.00
26,00 € tax excl.
Pair of "SANTORINI" iron wingsMeasures: 30 (33x6x10.50 cm) - 50 (50x6x10.50 cm)
Filter By
Filter By
Home
Filter By
€73.77
73,77 € tax excl.
Cast iron swivel table vise with jaws attached.
Opening mm 150
Jaws mm 150
Depth mm 70
Net weight kg 11.3
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€1.56
1,56 € tax excl.
Joint for the series connection of two pipes with automatic fittings installed at the ends.
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€376.23
376,23 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 2.3
Engine 6.5 Hp
Displacement 212 cc
Voltage 230V
Single-phase synchronous...
€901.64
901,64 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€11.07
11,07 € tax excl.
Fireproof Adapter with 16 A plug and industrial socket. IP20.
€11.07
11,07 € tax excl.
Fireproof Adapter with industrial plug and universal socket. IP20.
€11.39
11,39 € tax excl.
Valex adjustable metal mesh visor, adjustable from the rear. to EN1731 standards
€11.89
11,89 € tax excl.
Chrome vanadium steel body - Jaws finish: glossy - Soft grip.
Dimensions: Length 300 mm, max opening 50 mm
€2.46
2,46 € tax excl.
Easy spray lance with quick connector for irrigation hose - Two-component material - Plastic body - Soft grip - Continuous jet adjustment.
€6.48
6,48 € tax excl.
Adjustable metal broom with galvanized steel Valex handle, Adjustable width 180-630 mm
€7.38
7,38 € tax excl.
Steel body - Finishing of the jaws: glossy - Ergonomic handle.
Length 240 mm
Maximum aperture 35 mm
Net weight 344 gr
€5.66
5,66 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and push release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€6.15
6,15 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and pull release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
€3.47
3,47 € tax excl.
Adjusting the left/right depth (optional) Blum
Suitable for plastic T51.7601 gray-colored powder dust
€17.13
17,13 € tax excl.
Airbrush with Valex drop tank equipped with bayonet quick coupling
TECHNICAL DATA
Pressure bar: 3
Air consumption l / min: 150
Tank l: 0.6
Type of attack: Bayonet and rapid
Ø hole nozzle mm: 1,5
€17.95
17,95 € tax excl.
Non-slip handle - Pressure gauge up to 11 bar - Height 65 cm - Tube diameter 3.8 cm - Double inflation connection - Supplied with adapters for inflating balls and mats.
€73.69
73,69 € tax excl.
Platform measures 255x270 mm with safety hooks against accidental closure - Non-slip steps in extruded aluminum 80 mm wide - Non-slip feet - Compliance with EN 131 standards - Capacity 150 kg - Upright section 40x20...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions.
Power 2000W
No-load speed 6500 rpm...
€24.59
24,59 € tax excl.
Disc lock button - Safety switch to prevent accidental startup - Adjustable disc guard - Front handle fixed in 2 positions.
Power 650W
No-load speed 11,500 rpm
Disc Ø 115 mm
Net weight 1.6 Kg
€110.57
110,57 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions.
Voltage 18 V
No-load...
€118.77
118,77 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions - The brushless motor...
€8.11
8,11 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€7.79
7,79 € tax excl.
Coated steel stranded cable - Supplied with 2 keys.
Cable length 1000 mm
Cable diameter 18 mm
€55.33
55,33 € tax excl.
To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter -...
€4.10
4,10 € tax excl.
Chromed metal double-joint hinges for toilet lid and seat
Complete with mounting gaskets
€35.98
35,98 € tax excl.
Auto CU battery connection cables
Copper cables with insulated pliers. Cable section 25 mm², cable length 2.5 m.
€9.00
9,00 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 90-220mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€4.51
4,51 € tax excl.
Chrome vanadium steel body - Black oxide finish - Plastic holder.
Sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mm
Length 45 - 65 mm
€2.05
2,05 € tax excl.
Bamboo stick for Skewers and Arrosticini 100 pz
Measurements: Ø= 3,3 mm, Length= 250 mm
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€49.10
49,10 € tax excl.
Foldable tank with support structure - With tap and quick connection to connect the irrigation hose - Ideal for rainwater recovery and garden irrigation.
Dimensions ØxH 600x920 mm
Capacity 250 Litres
€0.54
0,54 € tax excl.
Pre-assembly base for Clip Top Hinge
Cross pre-assembly plate with Euro screw Ø 6 mm.
Distance: 0mm/3mm
Material: Steel
Surface: Nickel-plated
Fixing: Euro screw, Distance between fixing positions: 32 mm -...
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€6.48
6,48 € tax excl.
Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut.
Dimensions:
Length 25 cm
Width 38 cm (handles included)
€4.92
4,92 € tax excl.
Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 21 cm
Width 16 cm
€4.92
4,92 € tax excl.
Pizza roller made of beech wood, ideal for preparing pizzas and doughs.
Dimensions:
Length 23 cm
Width 13 cm
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Diameter Ø 38 mm
Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 28.5 cm
Large: Length 34 cm
€1.31
1,31 € tax excl.
Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 26.5 cm
Large: Length 33.5 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small with 2 Pockets: Length 32 cm - Width 20 cm
Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 33 cm
Width 6 cm
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€196.64
196,64 € tax excl.
To cut wood and derivatives, plastic and foam materials - Possibility of making straight, transverse and inclined cuts.
Technical data :
- power 2000W - rpm at no load 4,800 - blade dimens. / teeth Ø250xø30mm /...
€110.66
110,66 € tax excl.
Spindle shaft on ball bearings - Worktable material in cast iron.
Power 350W
Number of speeds 5
No-load speed 630 - 2,800 RPM
Chuck 13 mm
Chuck fitting B16 MT2
Spindle travel 50 mm
Worktable 160x160 mm...
€2.05
2,05 € tax excl.
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€27.05
27,05 € tax excl.
Bermuda work shorts Evolution MANOVRE by PLANO in Syrex, traspiring fabric treated with Teflon, Raptor reinforced fabric, folding rule pocket, triple stitching, removable knees with zip and knee pads.
Ideal for the...
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€39.26
39,26 € tax excl.
Connectable to petrol-powered augers with a crankshaft Ø 20 mm - Tip with a hardened steel plate.
Diameter Ø 20 cm
Length 80 cm
Suitable for petrol-powered auger AUGER 50/52.
€10.25
10,25 € tax excl.
Protection rating IP55 - Natural light 4000K - Twilight and motion sensor - Sensor angle 120° - Rear courtesy light - 2 operating modes: Mode A turns on at medium brightness in the dark, switches to 100% when motion...
€11.07
11,07 € tax excl.
3 universal sockets - 6 lateral 10 / 16A bypass sockets - Italian plug with 16A earth contact - safe: in fireproof material - cable length 1.5 m - cable section 3x1.5 mm² - With switch.
€3.28
3,28 € tax excl.
Body in plastic material - Quick connection - For precision blowing in inaccessible places.
€0.82
0,82 € tax excl.
CHARACTERISTICS:
Application: for fixing mobile parts
Plastic housing with pre-assembled zinc eccentric
Plastic connecting element
Available colors: White and Brown
Dimensions (height / width / depth):...
€57.38
57,38 € tax excl.
Blum AMBIA-LINE film holder, for drawer height M and height K from a nominal length of 450 mm.
Double unit, transparent and aluminum film holder.
Length 356 mm Width 200 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening, external stop cover.
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening, half external rabbet cover.
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€8.00
8,00 € tax excl.
ClipTop hinge with integrated Blumotion 110 ° opening
Clip Top cushioned hinge with adjustment, door thickness max 23 mm
€0.82
0,82 € tax excl.
CLIP pre-assembly plate, straight, 0 mm, Steel, for screwing on chipboard screws.
Recommended standard pre-assembly plates for Aventos HK-XS
The spacer depends on the upper gap
€4.10
4,10 € tax excl.
Blum CLIP top 70T5550.TL standard 120° hinge, Overlay hinge, without spring, base: To be screwed
Includes base 175H3100
€7.38
7,38 € tax excl.
Clip Top hinge for furniture with column with integrated Blumotion Opening 95°
* Buy with pre-assembly base of 3 mm *
€5.74
5,74 € tax excl.
Central hinge for AVENTOS for folding door 134°, without spring, 78Z550.T
Includes base 173H7100
€1.30
1,30 € tax excl.
Blum hinge recommended for CLIP top 110 ° TIP-ON
EXTRA DISCOUNT FOR PACKAGING
€16.31
16,31 € tax excl.
Blum springless hinge for glass and mirror doors 79C450BT complete with base plate to be glued onto the door 78C4568 no glass drilling required
€24.51
24,51 € tax excl.
Blum knife holder AMBIA-LINE, for drawer height M and height K by a nominal length of 450 mm
Length 409 mm Width 187 mm, for 9 knives
€36.89
36,89 € tax excl.
Portaposate in acciaio Inox Blum Orga-Line
Per corpo mobile 551-599 mm
Lunghezza nominale cassetto 450 mm
€48.36
48,36 € tax excl.
Portaposate in acciaio Inox Blum Orga-Line
Lunghezza nominale cassetto : 500 mm
Lunghezza : 474 mm
Larghezza minima : 200 mm
Altezza : 64.2 mm
€0.76
0,76 € tax excl.
Blum support platelet starboard to screw, recessed
Available in colors:
SW (White Silk)
PG (Platinum Grey)
TS (Black Earth)
€3.40
3,40 € tax excl.
Piston recessed push-open doors for Ø 10 plastic.Available in short version, 50 mm and 76 mm long version and colors SW (Black Silk), PG (Platinum Grey), TS (black earth)
EXTRA DISCOUNT FOR PACKAGING
€7.30
7,30 € tax excl.
Tilting steel blade with set and hardened teeth
- Steel structure
- blade 530 mm
- teeth / thumb 4
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
€12.30
12,30 € tax excl.
Bracket folding BLUM AVENTOS HK-XS Standard opening angle 105 °
In case of hinges with smaller aperture angle, this is limited by the hinge
EXTRA DISCOUNT FOR PACKAGING
Showing 1-90 of 706 item(s)
Italiano
Français
Deutsch
Español