€3.03
3,03 € tax excl.
1.0 m steel rod for KYR 20 furniture locks
Available finishes: Nickel Plated - Bronzed
Filter By
Filter By
Home
Filter By
€73.77
73,77 € tax excl.
Cast iron swivel table vise with jaws attached.
Opening mm 150
Jaws mm 150
Depth mm 70
Net weight kg 11.3
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€1.56
1,56 € tax excl.
Joint for the series connection of two pipes with automatic fittings installed at the ends.
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€376.23
376,23 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 2.3
Engine 6.5 Hp
Displacement 212 cc
Voltage 230V
Single-phase synchronous...
€901.64
901,64 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€11.48
11,48 € tax excl.
Wipes soaked in a special oil for the regular care of stainless steel surfaces. Pack of 5 single-dose wipes.
€11.07
11,07 € tax excl.
Fireproof Adapter with 16 A plug and industrial socket. IP20.
€11.07
11,07 € tax excl.
Fireproof Adapter with industrial plug and universal socket. IP20.
€11.39
11,39 € tax excl.
Valex adjustable metal mesh visor, adjustable from the rear. to EN1731 standards
€11.89
11,89 € tax excl.
Chrome vanadium steel body - Jaws finish: glossy - Soft grip.
Dimensions: Length 300 mm, max opening 50 mm
€2.46
2,46 € tax excl.
Easy spray lance with quick connector for irrigation hose - Two-component material - Plastic body - Soft grip - Continuous jet adjustment.
€6.48
6,48 € tax excl.
Adjustable metal broom with galvanized steel Valex handle, Adjustable width 180-630 mm
€7.38
7,38 € tax excl.
Steel body - Finishing of the jaws: glossy - Ergonomic handle.
Length 240 mm
Maximum aperture 35 mm
Net weight 344 gr
€5.66
5,66 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and push release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€6.15
6,15 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and pull release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
€17.13
17,13 € tax excl.
Airbrush with Valex drop tank equipped with bayonet quick coupling
TECHNICAL DATA
Pressure bar: 3
Air consumption l / min: 150
Tank l: 0.6
Type of attack: Bayonet and rapid
Ø hole nozzle mm: 1,5
€17.95
17,95 € tax excl.
Non-slip handle - Pressure gauge up to 11 bar - Height 65 cm - Tube diameter 3.8 cm - Double inflation connection - Supplied with adapters for inflating balls and mats.
€73.69
73,69 € tax excl.
Platform measures 255x270 mm with safety hooks against accidental closure - Non-slip steps in extruded aluminum 80 mm wide - Non-slip feet - Compliance with EN 131 standards - Capacity 150 kg - Upright section 40x20...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions.
Power 2000W
No-load speed 6500 rpm...
€24.59
24,59 € tax excl.
Disc lock button - Safety switch to prevent accidental startup - Adjustable disc guard - Front handle fixed in 2 positions.
Power 650W
No-load speed 11,500 rpm
Disc Ø 115 mm
Net weight 1.6 Kg
€110.57
110,57 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions.
Voltage 18 V
No-load...
€118.77
118,77 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions - The brushless motor...
€131.15
131,15 € tax excl.
Angle adapter for drills and rotary tools, useful for drilling or screwing in hard-to-reach areas.
Tool connection Thread 1/2-20 UNF 3
Collar diameter (for tool attachment) Ø 43 mm
Gear reduction ratio 2:1...
€8.11
8,11 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€0.82
0,82 € tax excl.
Kyr K011 steel Angular strikeing hook to screw on, Kyr 011NI, nickel finish
€7.79
7,79 € tax excl.
Coated steel stranded cable - Supplied with 2 keys.
Cable length 1000 mm
Cable diameter 18 mm
€55.33
55,33 € tax excl.
To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter -...
€4.10
4,10 € tax excl.
Chromed metal double-joint hinges for toilet lid and seat
Complete with mounting gaskets
€35.98
35,98 € tax excl.
Auto CU battery connection cables
Copper cables with insulated pliers. Cable section 25 mm², cable length 2.5 m.
€9.00
9,00 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 90-220mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€4.51
4,51 € tax excl.
Chrome vanadium steel body - Black oxide finish - Plastic holder.
Sizes: 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 mm
Length 45 - 65 mm
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€49.10
49,10 € tax excl.
Foldable tank with support structure - With tap and quick connection to connect the irrigation hose - Ideal for rainwater recovery and garden irrigation.
Dimensions ØxH 600x920 mm
Capacity 250 Litres
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€6.48
6,48 € tax excl.
Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut.
Dimensions:
Length 25 cm
Width 38 cm (handles included)
€4.92
4,92 € tax excl.
Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 21 cm
Width 16 cm
€4.92
4,92 € tax excl.
Pizza roller made of beech wood, ideal for preparing pizzas and doughs.
Dimensions:
Length 23 cm
Width 13 cm
€1.64
1,64 € tax excl.
Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Diameter Ø 38 mm
Height 8 cm
€1.31
1,31 € tax excl.
Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 28.5 cm
Large: Length 34 cm
€1.31
1,31 € tax excl.
Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small: Length 26.5 cm
Large: Length 33.5 cm
€8.20
8,20 € tax excl.
Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques.
Available in 2 sizes:
Small with 2 Pockets: Length 32 cm - Width 20 cm
Large with 3 Pockets:...
€3.28
3,28 € tax excl.
Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Length 33 cm
Width 6 cm
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€196.64
196,64 € tax excl.
To cut wood and derivatives, plastic and foam materials - Possibility of making straight, transverse and inclined cuts.
Technical data :
- power 2000W - rpm at no load 4,800 - blade dimens. / teeth Ø250xø30mm /...
€110.66
110,66 € tax excl.
Spindle shaft on ball bearings - Worktable material in cast iron.
Power 350W
Number of speeds 5
No-load speed 630 - 2,800 RPM
Chuck 13 mm
Chuck fitting B16 MT2
Spindle travel 50 mm
Worktable 160x160 mm...
€2.05
2,05 € tax excl.
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€39.26
39,26 € tax excl.
Connectable to petrol-powered augers with a crankshaft Ø 20 mm - Tip with a hardened steel plate.
Diameter Ø 20 cm
Length 80 cm
Suitable for petrol-powered auger AUGER 50/52.
€10.25
10,25 € tax excl.
Protection rating IP55 - Natural light 4000K - Twilight and motion sensor - Sensor angle 120° - Rear courtesy light - 2 operating modes: Mode A turns on at medium brightness in the dark, switches to 100% when motion...
€11.07
11,07 € tax excl.
3 universal sockets - 6 lateral 10 / 16A bypass sockets - Italian plug with 16A earth contact - safe: in fireproof material - cable length 1.5 m - cable section 3x1.5 mm² - With switch.
€3.28
3,28 € tax excl.
Body in plastic material - Quick connection - For precision blowing in inaccessible places.
€77.87
77,87 € tax excl.
Base for GSG 300 foam rubber cut professional.
Dimensions: 173x64x15 mmWeight: 113 g
Cut to a material thickness of 30 cm.
€112.30
112,30 € tax excl.
Blade guide, available material thickness:
70 - 130 - 200 - 300 mm
€204.10
204,10 € tax excl.
Universal miter saw bench with supports for the workpiece.
Integrated supports extendable on both sides to hold long pieces in place
Steel structure
Universal tool holder adaptable to virtually any miter saw on...
€600.08
600,08 € tax excl.
FEATURES:
- Table saw and miter saw in one tool
- Precise work with integrated lighting and laser
- Powerful 1,800 W motor for rapid work progress (cutting depth up to 95 mm - bevel cutting function and cutting...
€176.00
176,00 € tax excl.
Bosch rotary hammer with SDS-Plus attack, POWER 790 Watt, impact force 2.7 Joule, diameter in concrete with hammer drills bits for 4-24 mm
€57.30
57,30 € tax excl.
Set of blades 2 pieces, available material thickness up to:
70 - 130 - 200 - 300 mm
€7.30
7,30 € tax excl.
Tilting steel blade with set and hardened teeth
- Steel structure
- blade 530 mm
- teeth / thumb 4
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
€1,065.57
1.065,57 € tax excl.
Features:
Eco Airflow air circulates in the fridge compartment to maintain an even temperature
Multi Box XXL extra-large drawer for storing fruits and vegetables
Intelligent Inverter Technology ensures stable...
€491.80
491,80 € tax excl.
Main features:
Red LED digital display: easy and convenient to use
EcoClean rear wall cleaning: a simple, ecological, safe and economical way to clean the rear wall of the oven while cooking, without any detergent...
€327.87
327,87 € tax excl.
Main features:
Cleaning Assistance: easier oven cleaning thanks to the new system which is perfect for light, non-encrusted dirt
Red LED digital display: easy and convenient to use
Adjustable temperature range...
€9.43
9,43 € tax excl.
Waste collector with aluminum support, suitable for remote collection of hazardous material.
Technical data:
- Length 76 cm
- Plastic coated presile with gripping tips
- Opening 9 cm
- Small magnet at the tip...
€10.66
10,66 € tax excl.
For bricks and joints.
Width 35 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€16.31
16,31 € tax excl.
Internal tray with compartments - 2 keys supplied.
Dimensions: 250x200x90 mm
€43.36
43,36 € tax excl.
Depth and sharpening angle adjustment - Adjustable clamp ±35°.
Power 85W
No-load speed 5,800 rpm
Manual chain feed
Grinding wheel outer diameter Ø 108 mm
Grinding wheel hole Ø 23.2 mm
Grinding wheel thickness...
€79.10
79,10 € tax excl.
Aluminum support plate - Safety switch against accidental ignition - Soft handle - Dust extraction arrangement.
Power 1400W
Idle rpm 4800
Blade size/teeth Ø190xø20mm/Z24
Teeth material hard metal
Max cut 90°: 68...
€4.92
4,92 € tax excl.
Head and tip in plastic material - Adjustable width of the irrigated sector from 0°-360° - Intermittent operation - Possibility of irrigation in series via front attachment.
Range 10 meters
€2.38
2,38 € tax excl.
Ideal for extracting juice from citrus fruits such as oranges, lemons, limes, etc. Round handle that comfortably fits in the palm of the hand, handcrafted in Abruzzo using high-quality techniques.
Dimensions:
Max...
€135.25
135,25 € tax excl.
Inrush current measurement - Duty cycle: percentage of active signal over total period - Batteries included.
Character height 17
Audible signal
Data hold
Measures capacitance, frequency and resistance
Frequency...
€17.95
17,95 € tax excl.
Data memory - Character height 12 mm - Buzzer - Battery included. For measurements of DC voltage, AC voltage, AC current, resistance and continuity.
Showing 1-90 of 590 item(s)
Italiano
Français
Deutsch
Español