€89.26
89,26 € tax excl.
Pinza torcifilo per torcere fili, per frenaggi di sicurezza, in acciaio al cromo-vanadio
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€122.87
122,87 € tax excl.
Internal Ø 32 mm, 4 m with universal luminaire connection, clip system and universal adapter (445.029), antistatic. Draft regulation included for the reduction of the suction depression, if necessary.
€569.90
569,90 € tax excl.
Power consumption watt 1200 watts
Air flow max. 4500 lt./min
Max. Depression 25000 Pa
Filter surface 5000 cm²
Container volume 30 lt.
Liquid capacity 17 lt.
Power socket 100-2400 watts
Cable length 7.5 meters....
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€654.92
654,92 € tax excl.
Kamado Monolith JUNIOR in ceramic is equipped with a cooking grill of 33 cm in diameter. Despite its small size, it maintains all the functions of its older brothers, having the ability to carry out both direct and...
€1,392.62
1.392,62 € tax excl.
Kamado Monolith CLASSIC Pro-Series 2.0 in ceramic with a cooking grill of 44 cm in diameter and a weight of 85 kg, the Classic satisfies an entire family. Grill, barbecue, charcoal oven, smoker oven for pizza and...
€818.85
818,85 € tax excl.
Kamado Monolith BASIC in ceramic has a cooking grill diameter of 46 cm and can, like all Kamado Monoliths, be used for grilling, barbecuing, cooking, smoking, roasting, baking pizza and bread and can also adopt all...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€20.41
20,41 € tax excl.
Support for cooking ribs in black painted steel. Used upside down it serves as a roasting basket and to facilitate the removal of large pieces of meat. Dimensions: (L x W x H): 34x20x12.5cm.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€210.00
210,00 € tax excl.
For using sanding/polishing sleeves. These are simply pushed over the rubber holder and held securely in place by centrifugal force.
External diameter Ø 100 mm
Internal connection diameter Ø 19 mm
€7.30
7,30 € tax excl.
Black apron in fabric for Barbecue with Monolith Logo.
€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115
VE electronic control: with infinitely adjustable speed control.
Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
€663.93
663,93 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander + Antistatic suction hose
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Antistatic suction...
€179.51
179,51 € tax excl.
Smerigliatrice angolare 1400 watt con eccezionale capacità di asportazione, 125 mm
€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
€564.75
564,75 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Measures looks image.
€1,094.00
1.094,00 € tax excl.
Giraffe for wall and ceiling. Equipped with an innovative system with interchangeable heads. The heads attach and detach with a simple click. Segmented sanding head with swiveling segment. This allows the machining of...
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€369.00
369,00 € tax excl.
Body only Handy-Giraffe sander.
Ideal for use on small surfaces and confined spaces, sanding plasterboard panels, panels in thermal insulating polystyrene and for preparation for painting. Equipped with an innovative...
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€9.84
9,84 € tax excl.
The lock for multiple lockings with double tongue and blade mechanism has a central rotor with 5 blades placed inside a zinc alloy box called stator, bushing or body. The double flange is drilled to allow the lock to...
€8.20
8,20 € tax excl.
Lockable handle length 28 mm in zinc alloy suitable for the insertion of 30 and 40 mm hook padlocks (5-7 mm shackle diameter). Thanks to the various lengths of the lockable cylinder, it is possible to apply it on both...
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€1.23
1,23 € tax excl.
Key type TRG Small in plastic.
Measures looks image.
€5.74
5,74 € tax excl.
Small universal spanner lock with cam 43 mm in die-cast metal . Cam with screw, washer and nut. Cam not assembled.
Key rotation 90 ° - 2 extractions
Measures looks image.
€8.03
8,03 € tax excl.
Spanner lock with flap single horizontal and control 30 mm DK for drawer unit, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, control 30 mm DK and nickel finishing ferrule.
Measures looks image.
€3.69
3,69 € tax excl.
Universal spanner lock imprint closure Fiat with lever 43 mm, in die-cast metal. Nickel body. Equipped with lever Q7 int. 43 and nut.
Key rotation 90 ° - 2 extractions
Measures looks image.
€4.92
4,92 € tax excl.
Universal spanner lock square head with flat lever 30 mm KD, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, lever Q7 int. 40 and nut.
Key rotation 90 ° - 1 extraction
Measures looks image.
€8.20
8,20 € tax excl.
The 1/4 turn triangular impression lock with adjustable cam is composed of a zinc alloy body inside which there is a spring-loaded rotor that, moved by a key, rotates determining the opening or closing. A 74 mm iron...
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€8.20
8,20 € tax excl.
Lock for mailboxes in die-cast metal. Black painted ferrule, nickel rotor. Equipped with 2 brass keys SCHG05082, lock yoke and cranked lever Q7 int. 34 .
Key rotation 90 ° - 1 extraction
Measures looks image.
€20.49
20,49 € tax excl.
Black plastic swing door lock with 2 keys, snap-fit. Key rotation 90° - 2 extractions Handle Rotation 90° Clockwise/Counterclockwise Available with black case and grey handle Measurements as per pictures.
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€163.85
163,85 € tax excl.
Plancha Fry Top Ø 60x0.6 cm ideal accessory for griddle cooking for Icon and Junior models only of the new Pro Series 2.0. An initial run-in is recommended before first use. Weight 14 kg.
€270.41
270,41 € tax excl.
The massive Ø 74x0.8 cm steel plate can easily be placed on top of the Monolith Classic open grate. To regulate the heat use the double disc ventilation cap. Before initial use: the best results are obtained after...
€5.66
5,66 € tax excl.
Slatted oval. 90° clockwise rotation, 2 key extractions (open/closed). Die-cast metal material.
Finishing: nickel-plated rotor, black painted bushing
Supplied accessories:
2 brass keys SCHG05082
Sling bar with 2...
€65.49
65,49 € tax excl.
The double-walled, painted steel/aluminium cooler box holds up to 17 litres. By simply adding ice, your meat, ingredients and drinks remain chilled for hours. The carry handle secures the lid, and ensures easy transport.
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€974.59
974,59 € tax excl.
Cesoia elettrica per tagli senza deformazione della lamiera
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€73.69
73,69 € tax excl.
The Wokset includes 5 pieces: Wok, Wok holder, ladle, turning spatula and sieve.
Showing 1-90 of 151 item(s)
Italiano
Français
Deutsch
Español