€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€13.11
13,11 € tax excl.
Kit of 2 galvanized ropes for garage overhead spare parts complete with T-hook and wire locking terminals133-wire formation (7x19)Breaking load 900 Kg (1900 LB)Rope diameter ø 4 mmLength 3 meters
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€89.26
89,26 € tax excl.
Pinza torcifilo per torcere fili, per frenaggi di sicurezza, in acciaio al cromo-vanadio
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€149.00
149,00 € tax excl.
Particularly suitable for universal machining of steel and metal, bodywork and mechanical carpentry. Microprocessor for the progressive start of the machine, lock against starting after power failure, temperature...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€122.87
122,87 € tax excl.
Internal Ø 32 mm, 4 m with universal luminaire connection, clip system and universal adapter (445.029), antistatic. Draft regulation included for the reduction of the suction depression, if necessary.
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€569.90
569,90 € tax excl.
Power consumption watt 1200 watts
Air flow max. 4500 lt./min
Max. Depression 25000 Pa
Filter surface 5000 cm²
Container volume 30 lt.
Liquid capacity 17 lt.
Power socket 100-2400 watts
Cable length 7.5 meters....
€40.49
40,49 € tax excl.
The kit includes:
1. Pruner-Bypass technology with the blade and the counterblade that cross allows you to make a clean and precise cut.-Maximum cutting diameter: 40 mm-Length of tool: 43.5 cm
2. Hacksaw:-The curved...
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€654.92
654,92 € tax excl.
Kamado Monolith JUNIOR in ceramic is equipped with a cooking grill of 33 cm in diameter. Despite its small size, it maintains all the functions of its older brothers, having the ability to carry out both direct and...
€1,392.62
1.392,62 € tax excl.
Kamado Monolith CLASSIC Pro-Series 2.0 in ceramic with a cooking grill of 44 cm in diameter and a weight of 85 kg, the Classic satisfies an entire family. Grill, barbecue, charcoal oven, smoker oven for pizza and...
€818.85
818,85 € tax excl.
Kamado Monolith BASIC in ceramic has a cooking grill diameter of 46 cm and can, like all Kamado Monoliths, be used for grilling, barbecuing, cooking, smoking, roasting, baking pizza and bread and can also adopt all...
€20.41
20,41 € tax excl.
Support for cooking ribs in black painted steel. Used upside down it serves as a roasting basket and to facilitate the removal of large pieces of meat. Dimensions: (L x W x H): 34x20x12.5cm.
€38.52
38,52 € tax excl.
Cutting head with 4010 / V blades, disassembled, for 4104 / V Lowe shears.
€8.50
8,10 € tax excl.
Reflexx L600 - latex glove with aloe vera - pack of 100 pieces
Aloe vera is only one of the many species of aloe, but undoubtedly the most used in both cosmetics and health. It is a plant known since ancient times...
€210.00
210,00 € tax excl.
For using sanding/polishing sleeves. These are simply pushed over the rubber holder and held securely in place by centrifugal force.
External diameter Ø 100 mm
Internal connection diameter Ø 19 mm
€7.30
7,30 € tax excl.
Black apron in fabric for Barbecue with Monolith Logo.
€2.14
2,14 € tax excl.
Winch galvanized steel wire rope, weather resistant.
Construction 49 wires (7x7)
Breaking strenght 250 Kg
Rope diameter ø 2,4 mm
Length 6 meters
€2.98
2,98 € tax excl.
Ropes galvanized for hoists and winches, weather resistant.
- 49-wire formation (7x7)
- Breaking load 250 Kg
- Rope diameter ø 2.4 mm
- Length 9 meters
€556.56
556,56 € tax excl.
Flat-head sander SFE 8-2 115
VE electronic control: with infinitely adjustable speed control.
Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional...
€663.93
663,93 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander + Antistatic suction hose
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Antistatic suction...
€179.51
179,51 € tax excl.
Smerigliatrice angolare 1400 watt con eccezionale capacità di asportazione, 125 mm
€245.08
245,08 € tax excl.
Serbatoio d'acqua a pressione da 10 lt, pressione d'esercizio 6 bar
€564.75
564,75 € tax excl.
GE 5 + SH Kit Giraffe wall and ceiling sander
VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Measures looks image.
€1,094.00
1.094,00 € tax excl.
Giraffe for wall and ceiling. Equipped with an innovative system with interchangeable heads. The heads attach and detach with a simple click. Segmented sanding head with swiveling segment. This allows the machining of...
€369.00
369,00 € tax excl.
Body only Handy-Giraffe sander.
Ideal for use on small surfaces and confined spaces, sanding plasterboard panels, panels in thermal insulating polystyrene and for preparation for painting. Equipped with an innovative...
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€11.48
11,48 € tax excl.
Kit of 2 galvanized ropes for overhead garage spare parts complete with loop and wire clamps133-wire formation (7x19)Breaking load 900 Kg (1900 LB)Rope diameter ø 4 mmLength 2.5 meters
€13.11
13,11 € tax excl.
Kit of 2 galvanized ropes for overhead garage spare parts complete with loop and wire clamps133-wire formation (7x19)Breaking load 900 Kg (1900 LB)Rope diameter ø 4 mmLength 3.5 meters
€7.38
7,38 € tax excl.
Knife sharpening with a special steel and pottery for a perfect sharpening on all kinds of scissors and knives.
€4.92
4,92 € tax excl.
CUT PROTECTIVE glove – Level C
The HPPE knit provides cut-resistance, while the elastane and polyamide render the glove elastic and comfortable.
The palm is coated with a DOUBLE application of MICROSANDY NITRILE,...
€2.87
2,87 € tax excl.
Seamless, in continuous-thread knit, coated externally in Nitrile.
POLYAMIDE/SPANDEX glove. The presence of Spandex increases the elasticity of the glove, also limiting the penetration of liquids.
The palm is...
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€1.07
1,07 € tax excl.
Weatherproof, plastic-coated steel wire rope.
Breaking load 450 Kg
Rope diameter ø 4 mm
Length in meters
€1.23
1,23 € tax excl.
Weatherproof, plastic-coated steel wire rope.
Breaking load 500 Kg
Rope diameter ø 5 mm
Length in meters
€1.39
1,39 € tax excl.
Weatherproof, plastic-coated steel wire rope.
Breaking load 800 Kg
Rope diameter ø 6 mm
Length in meters
€163.85
163,85 € tax excl.
Plancha Fry Top Ø 60x0.6 cm ideal accessory for griddle cooking for Icon and Junior models only of the new Pro Series 2.0. An initial run-in is recommended before first use. Weight 14 kg.
€270.41
270,41 € tax excl.
The massive Ø 74x0.8 cm steel plate can easily be placed on top of the Monolith Classic open grate. To regulate the heat use the double disc ventilation cap. Before initial use: the best results are obtained after...
€1.23
1,23 € tax excl.
Polyamide glove, extremely elastic and offering high sensitivity
Palm coated in POLYURETHANE for utmost breathability
Particularly suitable for the general manufacturing, logistics, construction, carpentry,...
€65.49
65,49 € tax excl.
The double-walled, painted steel/aluminium cooler box holds up to 17 litres. By simply adding ice, your meat, ingredients and drinks remain chilled for hours. The carry handle secures the lid, and ensures easy transport.
€3.70
3,52 € tax excl.
Disposable, ambidextrous. Beaded cuff. 100% Latex Free. Special “Soft” formulation for increased elasticity and sensitiveness. The absence of powder also reduces the risk of dermatitis and contamination. Micro...
€5.00
4,76 € tax excl.
POWDER FREE NITRILE GLOVES - gr. 3.0
MULTI-USE glove suitable for multiple sectors of use thanks to its versatility
PPE Cat. I risk (Reg 2016/425 UE)
MEDICAL DEVICE in the hospital and dental field (AQL 1,5), for...
€45.08
45,08 € tax excl.
Professional lopper with Bypass cutting Stocker
Able to cut branches up to 40 mm in diameter.
Length: 75-100 cm
Weight: 1,5 kg
€14.84
14,84 € tax excl.
Pruning saw with umbrella handle 30 cm Stocker
Length : 30 cm
Weight : 254 g
€15.57
15,57 € tax excl.
Pruning saw with umbrella handle 30 cm Stocker
Length : 33 cm
Weight : 394 g
€12.21
12,21 € tax excl.
Pruning shears 21 cm Stocker
Length : 21 cm
Weight : 302 g
€12.21
12,21 € tax excl.
Replacement blade for 1513 Stocker hacksaw
Length: 30cm
Weight: 150 g
€974.59
974,59 € tax excl.
Cesoia elettrica per tagli senza deformazione della lamiera
€9.05
9,05 € tax excl.
Rope cable made of 316 stainless steel, weather resistant.
- 49-wire formation (7x7)
- Breaking load 250 Kg
- Rope diameter ø 2 mm
- Length 10 meters
€13.51
13,51 € tax excl.
Rope cable made of 316 stainless steel, weather resistant.
- 49-wire formation (7x7)
- Breaking load 500 Kg
- Rope diameter ø 3 mm
- Length 10 meters
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€73.69
73,69 € tax excl.
The Wokset includes 5 pieces: Wok, Wok holder, ladle, turning spatula and sieve.
€1,099.00
1.099,00 € tax excl.
Set consisting of:
Giraffe wall and ceiling sander GE 7
Handy-Giraffe GCE 6-EC
Rotary sanding head with edge segment MH-R D225
Clip-on quick clamping ring red SH-FC 32
Antistatic suction hose with auxiliary air...
€1.56
1,56 € tax excl.
Hinge anuba 14 steel door and window frames SFS intec wheelbase 13.6 mm
€113.31
113,31 € tax excl.
SFS intec Set - Wire Application - matched 13/14
€113.31
113,31 € tax excl.
Set - wire application - matched by 9/11 for doors and window frames SFS intec
€3.20
3,20 € tax excl.
Adjustable hinge 11R by 14 for wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€39.05
39,05 € tax excl.
15 mm door closer with two strips for flush fire doors
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges 14 SFS intec for 11 R
€1.35
1,35 € tax excl.
Hinge anuba 16 steel for door and window frames SFS intec distance 15.6 mm
€1.78
1,78 € tax excl.
Hinge Anuba Z Steel 14 for door and window frames SFS intec center distance 13.6 mm
Stem off-axis for special applications.
Showing 1-90 of 173 item(s)
Italiano
Français
Deutsch
Español